2″ Prime Silicon Wafer Tnickness 675 +/- 20 microns

PAM XIAMEN offers 2″ Prime Silicon Wafer Tnickness 675 +/- 20 microns.

2 inch in diameter wafers
Monocrystalline silicon with insulating oxide
Polishing: one-sided for microelectronics
Thickness: 675 +/- 20 microns
TTV <15 microns,
Warping <35 microns

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Quality is our first priority. PAM-XIAMEN has been ISO9001:2008, owns and shares four modern facories which can provide quite a big range of qualified products to meet different needs of our customers, and every order has to be handled through our rigorous quality system.Test report is provided for each shipment, and each wafer are warranty.

2019-07-01

Related Posts

Strain-free epitaxy of germanium film on mica

Flexible semiconductor Ge thin film grown on mica by van der Waals epitaxy. The film experiences no degradation in its electrical properties even after repeated bending. Credit: Aaron Littlejohn, Rensselaer Polytechnic Institute Germanium, an elemental semiconductor, was the material of choice in the early history [...]

2018-05-08meta-author

Ceramic Substrate-13

PAM XIAMEN offers Glass Substrates(Mo-Coated sodalime Glass and TiO2 Coated Sodalime Glass and ZnO Coated Sodalime Glass). Mo-Coated sodalime Glass Mo-coated Sodalime Glass, 100 mm(L) x 100 mm(W) x 1.1 mm thk Mo-coated Sodalime Glass, 20 mm(L) x 15 mm(W) x 0.7 mm th [...]

2019-04-18meta-author

8″ Silicon Wafer-2

PAM XIAMEN offers 8″ Silicon Wafer 8″ Silicon Wafer P-Type Diameter 200.00±0.5 mm Thickness 725±50μm Dislocation density < 10-2 cm-2 Dopant – Boron Resistivity- 10-40 Ω.cm Chamfer width 700-1000 μm Orientation – (100)±0.5 single sided polishing For more information, please visit our website: https://www.powerwaywafer.com, send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is [...]

2019-09-03meta-author

4″ Silicon Wafer-6

PAM XIAMEN offers 4″ Silicon Wafer. Material Orient. Diam. Thck (μm) Surf. Resistivity Ωcm Comment p-type Si:B [100] 4″ 300 P/P 5-10 SEMI Test, Scratched and unsealed. Can be re-polished for extra fee p-type Si:B [100] 4″ 380 P/E 5-10 SEMI TEST (in Opened cassette), 2Flats p-type Si:B [100] 4″ 380 P/E 5-10 SEMI Prime p-type Si:B [100] 4″ 380 P/E 5-10 SEMI TEST (with bad surface) p-type Si:B [100] 4″ 380 P/E 5-10 SEMI Prime, hard cst, Back-side slightly darker than normal p-type Si:B [100] 4″ 380 P/E 5-10 SEMI Test, Dirty wafers, can be cleaned for extra fee p-type Si:B [100] 4″ 380 BROKEN 5-10 Broken P/E Wafers, [...]

2019-03-05meta-author

GaAs (100) crystal-3

PAM XIAMEN offers GaAs(100) Si- doped crystal . GaAs – Growing Method: VGF (100) Si doped, N-type, 2″ dia x 0.35mm, 2sp,cc: (1.07-3.89) x 10^18 /cm^3 GaAs – Growing Method: VGF (100) Si doped, N-type, 2″ dia x 0.35mm, 1sp,cc: (1.65-3.59) x 10^18 /cm^3 [...]

2019-04-22meta-author

Non-destructive evaluation of the strain distribution in selected-area He+ ion irradiated 4H-SiC

We are an expert of semiconductor wafers in semiconductor industry, and we offer technology support and wafers selling for thousands of univerisities and industrial customers by our decades experience, including Cornell University, Stanford Univeristy,Peking University, Shandong Univerity, university of south carolina,Caltech Faraon lab (USA）,University of California, Irvine (USA),Singapore MIT Alliance for Research and Technology Centre (SMART),West Virginia University,Purdue Univerity, University of California, Los Angeles,King Abdullah University of Science & Technology,Massachusetts Institute of Technology,University of Houston,University of Wisconsin,University of Science and Technology of China etc. And now we show one article example as follows, who bought our wafers or service: Article title: Non-destructive evaluation of the strain distribution in selected-area He+ ion irradiated 4H-SiC Published by: Subing Yang;Sakiko Tokunaga;Minako Kondo;Yuki Nakagawa;Tamaki Shibayama; a Graduate School of [...]

2019-12-02meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.