2″ Silicon Wafer-11

PAM XIAMEN offers 2″ Silicon Wafer.

Material	Orient.	Diam.	Thck (μm)	Surf.	Resistivity Ωcm	Comment
p-type Si:B	[110]	2″	2000	P/P	1-10	1 F @ <1,-1,0>
p-type Si:B	[110]	2″	350	P/E	0.1-1.0	PF<111> SF 109.5°
p-type Si:B	[110]	2″	280	P/P	0.080-0.085	PF<111> SF 109.5°
p-type Si:B	[100]	2″	500	P/P	1,300-8,000	SEMI Prime
p-type Si:B	[100]	2″	500	P/P	1,300-2,600	SEMI Prime
p-type Si:B	[100]	2″	250	P/P	FZ 510-1,200	SEMI Prime
p-type Si:B	[100]	2″	300	P/P	~150	SEMI Prime
p-type Si:B	[100]	2″	300	P/P	90-120	SEMI Prime
p-type Si:B	[100]	2″	300	P/P	70-80	SEMI Prime
p-type Si:B	[100]	2″	1400	P/P	6-8	Prime, NO Flats
p-type Si:B	[100]	2″	1500	P/P	6-8	Prime, NO Flats
p-type Si:B	[100]	2″	3000	P/E	6-8	Prime, NO Flats, Individual cst
p-type Si:B	[100]	2″	3000	P/E	4.9-5.3	Prime, NO Flats, Individual cst
p-type Si:B	[100]	2″	300	P/E	1-10	SEMI Prime
p-type Si:Ga	[100]	2″	350	P/P	1-5	SEMI Prime
p-type Si:B	[100]	2″	500	P/E	1-2	SEMI Prime
p-type Si:B	[100]	2″	900	P/E/P	1-10	SEMI Prime
p-type Si:B	[100]	2″	2000	P/P	1-10	SEMI Prime, , Individual cst
p-type Si:B	[100]	2″	2000	P/E	1-10	SEMI Prime, Individual cst
p-type Si:B	[100]	2″	2800	P/E	1-10	SEMI Prime, , Individual cst
p-type Si:B	[100]	2″	3000	P/E	1-10	SEMI Prime, Individual cst

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at [email protected] and [email protected]

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China.
PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices.
PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Before 1990, we are stated owned condensed matter physics research center. In 1990, center launched Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN), now it is a leading manufacturer of compound semiconductor material in China.

2019-03-07

Related Posts

4″ FZ Prime Silicon Wafer-4

PAM XIAMEN offers 4″FZ Prime Silicon Wafer. Silicon wafers, per SEMI Prime, P/E 4″Ø×525±25μm, FZ Intrinsic undoped Si:-[111]±0.5°, Ro > 10,000 Ohmcm, TTV<5μm, Bow<20μm, Warp<30μm, One-side-Epi-Ready-polished, back-side etched, SEMI Flats, Sealed in Empak or equivalent cassette, MCC Lifetime>1,000μs. For more information, please visit our [...]

2019-07-05meta-author

YSGG single crystal

PAM XIAMEN offers YSGG single crystal. PAM XIAMEN is developing a series of doped GGG single crystal for nest generation Magneto-optical device. Composition GGG YSGG S-GGG（CaMgZr：GGG） NGG GYSGG GSGG (Cubic) Gd3Ga5O12 Y3Sc2Ga3O5 Gd2.6Ca0.4Ga4.1Mg0.25Zr0.65O12 Nd3Ga5O12 Gd0.63Y2.37Sc2Ga3O12 Gd3Sc2Ga3O12 Lattice constant 12.376 Å 12.426 Å , 12.480 Å 12.505Å 12.507 Å , 12.554 Å , Diffraction（2θ） 51º7′ 50º44′ 50º43′ 50º41′ 50º40′ 50º22′ Melting Point ~1800 oC ~1877℃ ~1730 oC ~1550 oC ~1730 oC ~1730 oC For more information, please visit our website: https://www.powerwaywafer.com, send us email at [...]

2019-05-21meta-author

GaN Epitaxial Growth on Sapphire for LED

The global demand for ultra-bright blue and green LEDs has driven the development of LED nitride wafer technologies. Among them, sapphire substrate is currently the most common substrate material in GaN epitaxial growth, and it is also the substrate of epitaxial GaN material with [...]

2022-03-25meta-author

A Super Heat Dissipation Material–Diamond Material

Today, among the existing semiconductor materials, diamond is one of the most promising semiconductor materials. Usually, it is used as diamond thermal management material. The article will mainly discuss the diamond from 3 parts: what is diamond, diamond material properties and its applications. 1. What Is Diamond? Diamond [...]

2021-04-30meta-author

4″ Monocrystalline Silicon Wafer with Thermal oxide 20nm

PAM XIAMEN offers 4″ Monocrystalline Silicon Wafer with Thermal oxide 20nm 4inch diameter wafer made of monocrystalline silicon with isolation oxide Diameter 101.6mm Polishing: one-sided for microelectronics Type of conductivity and alloying: not specified Surface orientation: not specified Primary and secondary flat orientation: not specified Thickness: 675 microns±20 microns Wedge (TTV): less than 15 microns TTV<15μm Distortion: less than 35 microns Thickness of the isolation oxide: at least 20 nm Front side: polished. Back side: lapped-etched For more information, send us email at [email protected] and [email protected]

2021-03-17meta-author

Welcome to our Semiconductor Wafer Maker Member – Xiamen Powerway Advanced Material Co.,Ltd

Welcome to our Semiconductor Wafer Maker Member – Xiamen Powerway Advanced Material Co.,Ltd Powerway wafer develops and manufactures wafers with Gallium Arsenide (GaAs), Gallium Nitride (GaN) technologies advanced high-performance RF solutions for customers worldwide. We are a leading semiconductor wafer in market serving customers in mobile devices,3G and 4G base station,WLAN,WiMAX,GPS,defense and aerospace markets. We have GaAs [...]

2012-06-20meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.