6″ Prime Silicon Wafer Thickness 500±25um

PAM XIAMEN offers 6″ Prime Silicon Wafer Thickness 500±25um.

6″ Si wafer
DSP
N-type
<111>
thickness 500±25um
resistivity40-100Ωcm

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at [email protected] and [email protected]

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Our goal is to meet all of your requirements, no matter how small orders and how difficult questions they may be,
to maintain sustained and profitable growth for every customer through our qualified products and satisfying service.

2019-07-01

InGaN/GaN/AlGaN-based laser diodes grown on free-standing GaN substrates

InGaN/GaN/AlGaN-based laser diodes grown on free-standing GaN substrates The InGaN multi-quantum-well (MQW)-structure laser diode (LD) was grown on an epitaxially laterally overgrown GaN on sapphire. The lowest threshold current densities between 1.2 and 2.8 kA cm−2 were obtained when the number of InGaN well layer was [...]

2014-04-11meta-author free-standing GaN substrates

2″CZ Prime Silicon Wafer

PAM XIAMEN offers 2″CZ Prime Silicon Wafer tem1, 100pcs Silicon wafer: i. Diameter: 50.8 mm ± 0.5 mm, ii. Thickness: 275 μm ±25μm, iii. Doping: P type iv. Orientation: (100) ± 0.5° v. TTV: ≤ 5 μm vi. Bow and Warp: ≤ 20 μm Growth: [...]

2020-03-25meta-author

LaF3 crystal

PAM XIAMEN offers LaF3 crystal. Structure Lattice (A) Melting Point Density g/cm3 Hardness Growth Max. Xtl Size Trigonal a=b= 7.190 c=7.367 a=b=90o, g=120o 1493 5.936 4.5 Bridgman 20dx 100mm LaF3 (100)ori. 9x9x0.5mm 1sp LaF3 (100)ori. 10x10x0.5mm 1SP LaF3 (100)ori. 7x7x0.5mm 2sp LaF3 6.35 mm Dia. x 1.575mm ,fine ground LaF3 (110)ori. 6 mm Dia. x 0.5mm 1sp LaF3 (100)ori. 10 mm Dia. [...]

2019-05-07meta-author

TiO2 Coated Sodalime Glass

PAM XIAMEN offers TiO2 Coated Sodalime Glass. TiO2( 150nm) Coated Sodalime Glass 1″ x1″x 0.7mm TiO2 Coated Sodalime Glass Dimension: 1″ x1″x 0.7mm Polish: both sides are optically clear Nominal TiO2 film thickness: 150 nm +/- 10% For more information, please visit our website: [...]

2019-04-29meta-author

Indium Antimonide (InSb) Single Crystal Substrates

Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) offers InSb crystal wafer up to 2″ in diameter that are grown by a modified Czochralski method from highly purified, zone refined polycrystalline ingots. More about the indium antimonide crystal substrate specifications, please see the following part: 1. Indium Antimonide [...]

2016-01-14meta-author InSb wafer

C-Plane Sapphire Substrate

C-Plane Sapphire Substrate AM-XIAMEN offers C-Plane Sapphire Substrate, single side polished or double side polished, please see below spec: 2” C-plane SSP Sapphire Substrate: No Item Specification 1 Material High PurityAl2O3 2 Diameter 50.8+0.1mm 3 Thickness 430土15um 4 TTV ≤10μm 5 LTV ≤1.5μm 6 Bow -10~0μm 7 Warp ≤10μm 8 Primary Flat Length 16.0土1.0mm 9 Front Surface Roughness(Ra)| Ra≤0.2nm Back Surface Roughness(Ra) 0.7~1.2μm 11 Primary Flat Orientation A-plane土0.2° 12 Surface Orientation C-Plane(0001) off Angle 0.2o+0.1″(M-axis);0°+0.1″(A-axis) 13 Laser Mark back side or frontside 14 Package 25pcs/Cassette, Vacuum-sealed, Nitrogen- filled, Class-100 Cleanroom Remark: [...]

2020-05-20meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

6″ Prime Silicon Wafer Thickness 500±25um

6″ Prime Silicon Wafer Thickness 500±25um

Share this post

Related Posts

InGaN/GaN/AlGaN-based laser diodes grown on free-standing GaN substrates

2″CZ Prime Silicon Wafer

LaF3 crystal

TiO2 Coated Sodalime Glass

Indium Antimonide (InSb) Single Crystal Substrates

C-Plane Sapphire Substrate

Float-Zone Mono-Crystalline Silicon

Test Wafer Monitor Wafer Dummy Wafer

Nanofabrication Photoresist

Photo Mask

CdZnTe (CZT) Wafer

Ge(Germanium) Single Crystals and Wafers

Float-Zone Mono-Crystalline Silicon

Test Wafer Monitor Wafer Dummy Wafer

Nanofabrication Photoresist

Photo Mask

CdZnTe (CZT) Wafer

Ge(Germanium) Single Crystals and Wafers