8″ Silicon Wafer

PAM XIAMEN offers 8″ Silicon Wafer.

Material	Orient.	Diam.	Thck (μm)	Surf.	Resistivity Ωcm	Comment
n-type Si:P	[100]	8″	725	P/E	FZ 2,000-6,000 {2,500-3,700}	SEMI notch Prime, TTV<6μm, Bow<15μm, Warp<40μm
p-type Si:B	[100]	8″	725	P/E	8-12	SEMI notch Prime, TTV<4µm
p-type Si:B	[100]	8″	725	P/E	MCZ 0.1-100.0	TEST grade, SEMI notch,TTV<4µm
p-type Si:B	[100]	8″	725	P/E	MCZ 0.005-0.010	Prime, SEMI notch,TTV<4µm
n-type Si:P	[100]	8″	725	P/P	1-2	SEMI notch Prime, Up to 200 wafers available

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China.PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices.PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Before 1990, we are stated owned condensed matter physics research center. In 1990, center launched Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN), now it is a leading manufacturer of compound semiconductor material in China.

2019-03-04

Related Posts

Au/Cr coated SiO2/Si substrate

PAM XIAMEN offers high-quality Au/Cr coated SiO2/Si substrate. Au (highly oriented polycrystalline) /Cr coated SiO2/Si substrate , 6″x0.675 mm,1sp P-type B-doped, Au(111)=150 nm, Cr=20nm Au (highly oriented polycrystalline) /Cr coated SiO2/Si substrate ,4″x0.525 mm,1sp P-type B-doped, Au(111)=50 nm, Cr=5 nm Au( highly oriented polycrystalline)/Cr [...]

2019-04-16meta-author

Low Temperature Grown InGaAs (LT-InGaAs)

PAM-XIAMEN offers low temperature grown InGaAs (LT-InGaAs) on GaAs Substrate for InGaAs Photo Conductive antenna substrate for THz, excitation wavelength will be 1030 nm. Low-temperature-grown In0.53Ga0.47As on GaAs is grown at low temperature using gaseous molecular beam epitaxy technology, and the effects of different growth temperatures and arsine pressures [...]

2020-09-16meta-author

A Plane U-GaN Freestanding GaN Substrate

PAM-XIAMEN offers A Plane U-GaN Freestanding GaN Substrate Item PAM-FS-GAN A-U Dimension 5 x 10 mm2 or 5 x 20 mm2 Thickness 380+/-50um Orientation A plane (11-20) off angle toward M-axis 0 ±0.5° A plane (11-20) off angle toward C-axis -1 ±0.2° Conduction Type N-type / Undoped Resistivity (300K) < 0.1 Ω·cm TTV ≤ 10 µm BOW BOW ≤ 10 µm Surface Roughness: Front side: Ra<0.2nm, epi-ready; Back side: Fine Ground or polished. Dislocation Density ≤5 x 106 cm-2 Macro Defect Density 0 cm-2 Useable Area > 90% (edge exclusion) Package each in single wafer container, under nitrogen atmosphere, packed in class 100 clean room For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com

2020-08-17meta-author

CZT Probe (CZT Detector with Preamplifier)

PAM-01C1 integrated customized hemispherial electrode CZT detector and low noise charge sensitive preamplifier. It can convert X/γ-ray into exponential decay signal. Working with five-pin cable, high and low power supply, main amplifier，those signals will be direct into multi-channel pulse analyzer and then the energy spectrum will be [...]

2019-04-23meta-author

Radial Resistance Variation of Gas-Phase Doped FZ Silicon

The FZ (float zone) gas-phase doped silicon single crystal with high purity, few defects, low compensation, and low oxygen and carbon content can be supplied by PAM-XIAMEN. It is widely used in various high-sensitivity detectors and low-loss microwave devices. To get more specifications of [...]

2022-08-16meta-author

8″CZ Prime Silicon Wafer

PAM XIAMEN offers 8″CZ Prime Silicon Wafer 8 inch prime silicon wafer Orientation CZ <111> Diameter 200mm Thickness 1±0.025mm Total Thickness Variation ≤25μm Warp ≤50μm Surface Sigle -side Polished P type Resistivity 1-80Ωcm For more information, send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

2020-06-10meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.