Pyroelectric Effect of AlN: Mechanism, Characteristics, and Applications +
PAM-XIAMEN can grow AlN thin film on Si, SiC, Sapphire substrate, more specifications please contact at [email protected]
Aluminum nitride(AlN), as a wide bandgap III nitride semiconductor, not only has excellent thermal stability, high mechanical strength, and good electrical properties, but also exhibits significant pyroelectric effects. Pyroelectric effect refers to the phenomenon of spontaneous polarization changes caused by temperature changes in a crystal, resulting in the generation of charges on the crystal surface. AlN belongs to the hexagonal wurtzite structure and exhibits spontaneous polarization along the c-axis direction, resulting in measurable pyroelectric current when subjected to external temperature changes. In recent years, with the advancement of AlN epitaxial growth technology, especially high-quality thick films are possibly prepared on SiC and Si substrates, so research on their thermoelectric properties has become increasingly in-depth.
1. Physical Basis of Pyroelectric Effect
The pyroelectric effect can be divided into primary pyroelectric effect and secondary pyroelectric effect. The former originates from the polarization changes caused by the non harmonic vibrations of atoms in the lattice, while the latter is polarized by the strain caused by thermal expansion through the piezoelectric effect. For materials such as AlN that exhibit both spontaneous polarization and piezoelectric polarization, the total pyroelectric coefficient can be expressed as:
In the formula, γP is the primary pyroelectric coefficient, and γ8 is the secondary pyroelectric coefficient. Theoretical studies have shown that at low temperatures (such as below 100K), the primary effect of AlN dominates, and its behavior follows the T3 law; At high temperatures, due to significant thermal expansion, secondary effects gradually increase.
2. Experimental Measurement and Pyroelectric Coefficient
Multiple researchers have measured the pyroelectric response of AlN thin films using dynamic laser heating method. For example:
Gavrilov et al. measured the pyroelectric coefficient of p=3.0 μC/(m2K) in the 6-12μm thick AlN epitaxial layer grown on SiC substrate, which remained stable in the frequency range of 0.1-500Hz.
Fig 1 Time dependent curves of AlN/SiC pyroelectric signal, surface temperature, and laser power
Fuflyigin et al. reported a 0.3μm thick AlN film grown on a Si substrate, with a pyroelectric coefficient of 6-8μC/(m2K) and stable performance at different biases and temperatures.
Stan et al. prepared AlN thin films on Si substrates using reactive magnetron sputtering and found that their pyroelectric coefficient was significantly affected by substrate resistivity and structural quality, reaching up to 12.4μC/(m2K).
These results indicate that although the pyroelectric coefficient of AlN is lower than some ferroelectric materials (such as PZT), its low dielectric constant, low loss tangent, and high thermal stability make it competitive in high-temperature pyroelectric sensors.
3. Influence of Substrate and Structure on Pyroelectric Properties of AlN
The substrate selection has a significant impact on the pyroelectric properties of AlN thin films. Gavrilov et al. compared AlN layers grown on SiC and Si substrates and found that the latter introduces strain and reduces the pyroelectric coefficient due to lattice mismatch and differences in thermal expansion coefficients (αSi=3.72 × 10−6 K−1, α11AlN=5.4 × 10−6 K−1). As the thickness of the AlN layer increases (such as reaching 110μm), and after removing the Si substrate, the pyroelectric coefficient increases from 6.2 to 8.6μC/(m2K), indicating that strain release helps to restore its intrinsic polarization characteristics.
Fig. 2 Relationship between AlN thickness and pyroelectric coefficient
In addition, Stan et al. pointed out that Si substrates generate additional signals due to photo generated carriers at specific wavelengths (such as 800nm), which interfere with the pyroelectric response of AlN itself, especially in high resistance Si substrates where this interference is more significant.
Fig. 3 Thermoelectric signals measured on AlN layers on Si substrates with different resistivities
4. Temperature Dependence and Theoretical Model of AlN Pyroelectric Properties
Yan et al. calculated the pyroelectric coefficient of AlN in the range of 0-1000K based on the Debye model, and found that it increased sharply with T3 at low temperatures below 400K, and then tended to plateau. This wide temperature range stability makes AlN particularly suitable for high-temperature sensors.
Fig. 4 Variation of AlN pyroelectric coefficient with temperature
Shaldin and Matyjasik measured the pyroelectric response of AlN single crystals in the range of 4.2-300K and found that oxygen impurities and structural defects introduce additional polarization, and even induce ferroelectric like ordering at low temperatures, significantly altering the pyroelectric behavior.
5. Application Prospects of AlN Pyroelectric Properties
The excellent pyroelectric properties of AlN material, combined with its high thermal conductivity, mechanical strength, and compatibility with semiconductor processes, have brought it broad application prospects.
In the field of infrared detection and imaging, AlN detectors can operate stably at room temperature or even higher, without Curie temperature limitations, and are suitable for non cooled infrared detectors in industrial monitoring, fire warning systems, and other applications. Its integration capability with silicon-based readout circuits has paved the way for consumer grade thermal imaging applications.
In the field of integrated sensors and microsystems, the compatibility between AlN and CMOS processes makes it an ideal material for multifunctional integration. AlN based microsensors can be used for non-contact monitoring in smart homes, and by combining their piezoelectric effect in MEMS, self powered smart sensing nodes can be achieved.
In terms of extreme environmental monitoring, AlN’s high radiation resistance and thermal stability make it an ideal choice for harsh environments such as deep space exploration and nuclear power plant monitoring, capable of withstanding extreme conditions such as high temperature and high radiation.
Whether you need AlN wafers for research or for industrial applications, please contact us email at [email protected] and [email protected].
References:
- Yan, W. S., Zhang, R., Xiu, X. Q., Xie, Z. L., Han, P., Jiang, R. L., … & Zheng, Y. D. (2007). Temperature dependence of the pyroelectric coefficient and the spontaneous polarization of AlN. Applied physics letters, 90(21).
- Gavrilov, G. A., Kapralov, A. F., Muratikov, K. L. V., Panyutin, E. A. E., Sotnikov, A. V. E., Sotnikova, G. Y., & Sharofidinov, S. S. (2018). Studying the pyroelectric effect in AlN epilayers. Technical Physics Letters, 44(8), 709-712.
- Stan, G. E., Botea, M., Boni, G. A., Pintilie, I., & Pintilie, L. (2015). Electric and pyroelectric properties of AlN thin films deposited by reactive magnetron sputtering on Si substrate. Applied Surface Science, 353, 1195-1202.
- Hansdah, G., & Sahoo, B. K. (2019). Pyroelectric property of binary nitrides (AlN, GaN and InN). International Journal of Thermophysics, 40(2), 20.
- Fuflyigin, V., Salley, E., Osinsky, A., & Norris, P. (2000). Pyroelectric properties of AlN. Applied Physics Letters, 77(19), 3075-3077.
- Gavrilov, G. A., Muratikov, K. L. V., Panyutin, E. A. E., Sotnikova, G. Y., & Sharofidinov, S. S. (2020). Specific features of the pyroelectric effect in epitaxial aluminum nitride layers obtained on Si substrates. Technical Physics Letters, 46(1), 16-18.
- Shaldin, Y. V., & Matyjasik, S. (2011). Pyroelectric properties of AlN wide-gap semiconductor in the temperature range of 4.2–300 K. Semiconductors, 45(9), 1117-1123.