BK7 Glass for Precision Lenses

PAM XIAMEN offers BK7 Glass for Precision Lenses.

Below are just some of the BK7 Glass Windows.

Please send us email at [email protected] if you need other specs and quantity.

Item	Dia (mm)	Thick (μm)	Pol	Qty in Stock
PAM3334	76.2	500	DSP	100
PAM3335	100	500	DSP	100
PAM3336	150	500	DSP	100

Following image shows the transmission spectrum of BK7 glass substrate:

Transmission spectrum of BK7 glass substrate

For more information, please contact us email at [email protected] and [email protected].

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China.PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices.PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

With more than 25+years experiences in compound semiconductor material field and export business, our team can assure you that we can understand your requirements and deal with your project professionally.

2019-02-27

Related Posts

4″ Epitaxial Silicon Wafer

PAM XIAMEN offers 4″ Epitaxial Silicon Wafer Item Parameter Spec Unit 1 Growth Method CZ 2 Diameter 100+/-0.5 mm 3 Type-Dopant P- Boron 4 Resistivity 0.002 – 0.003 ohm-cm 5 Resistivity Radial Variation <10 % 6 Crystal Orientation <111> 4 +/- 0.5 degree 7 Primary Flat Orientation Semi degree Length Semi mm 8 Secondary Flat Orientation Semi degree Length semi mm 9 Thickness 525 +/- 25 μm 10 TTV ≦10 μm 11 Bow ≦40 μm 12 Warp ≦40 μm 13 Front Surface polished 14 Backside etched — 5000 +/-10% Angstoms SiO2 15 Surface Appearance no Cratches, haze, edge chips, orange peel, defects,contamination — 16 Edge Profile Edge Rounding 17 Particle (>0.3μm) N/A ea/wf 18 — — — 19 Epi Layer 1 N Phos — 20 Resistivity 3.8 – 5.2 ohm cm 21 Thickness 29.0 – 35.0 um — — — 22 Epi Layer [...]

2021-03-16meta-author

Local structural, magnetic and magneto optical properties of Mn-doped SiC films prepared on a 3C SiC 001 wafer

Abstract We report on a systematic study of local structural, magnetic and magneto-optical properties of Mn-doped SiC films synthesized on a 3C–SiC(001) homoepitaxial wafer by an annealing method. A thin Mn layer was deposited on the SiC wafer, and then annealing was performed to diffuse [...]

2017-06-02meta-author

125mm (5 Inch) Silicon Wafers

N-type or P-type 125mm silicon wafer can be supplied with the orientation of <111> or <100>. More specs are shown as following: 1. 125mm Silicon Substrate Wafer List No. 1 ID Dia Type Dopant Ori Res (Ohm-cm) Thick (um) Polish Grade Description PAM2683 125mm N As <111> <0.0035 375um SSP MECH Mechanical Grade. EPI Layer: N/Phos Res: 4.59-5.874ohm.cm 12-16um PAM2684 125mm N P <100> <0.001 3000um SSP Test 3mm thick PAM2685 125mm P B <111> 43485 525-575um SSP Test Sold As-Is PAM2686 125mm P B <111> 43485 500-550um SSP Test Sold As-Is No. 2 Item Material Orient. Diam (mm) Thck (μm) Surf. Resistivity (Ωcm) Comment PAM2687 p-type Si:B [100] 5″ 889 [...]

2019-02-20meta-author

10*10 mm2 N-GaN Freestanding GaN Substrate

PAM-XIAMEN, one of leading GaN substrate manufacturers, offers 10*10mm2 N-Type Freestanding GaN Substrate. To get more specific information please see the table below: 1. N-Type Freestanding GaN Substrate Specification Item PAM-FS-GAN-50-N Dimension 10 x 10.5 mm2 Thickness 380+/-50um Orientation C plane (0001) off angle toward M-axis 0.35 ±0.15° Conduction Type N-type / Si Doped Resistivity (300K) < 0.05 Ω·cm TTV ≤ 10 µm BOW BOW ≤ 10 µm Surface Roughness: Front side: Ra<0.2nm, epi-ready; Back side: Fine Ground or polished. Dislocation Density ≤5x 106 cm-2 (calculated by CL)* Macro Defect Density 0 cm-2 Useable Area > 90% (edge exclusion) Package each in single wafer container, under nitrogen atmosphere, packed in [...]

2020-08-17meta-author

Worldwide semiconductor market is expected to grow further in both 2015 and 2016

According to data published by WSTSabout worldwide semiconductor market, all product categories and regions are forecasted to grow steadily but moderately in the next two years, under the assumption of a further macro economy recovery throughout the entire forecast period and maturing historically strong [...]

2016-03-15meta-author

Dependence of arsenic antisite defect concentration and two dimensional growth mode on LT GaAs growth conditions

Dependence of arsenic antisite defect concentration and two dimensional growth mode on LT GaAs growth conditions We investigated the dependence of Arsenic antisite defect concentration and that of epitaxial thickness (tepi), above which a transition to three dimensional growth appears, on the growth conditions of [...]

2014-02-17meta-author LT-GaAs

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.