CZT α-ray Detector

PAM-P02, the α series energy spectrum detectors are charged particles detector based on CZT crystal in super small size. They can be used in common environment and vacuum environment. For vacuum environment, they have an especially high energy resolution.

The detector integrates CZT crystal, visible light shield window and coated in metal. They can work under visible light. And the window material can be cleared many times.

CZT α-ray Detector

1. CZT α-ray Detector Specification

Material	CdZnTe
Density	5.8g/cm3
Volume resistance	>1010Ω.cm
Dimensions	22.0×22.0mm2
Thickness	0.7mm
Effective area	20.0×20.0mm2
Operation temperature	-20℃-+40℃
Energy resolution	<1%@5.48MeV, 25℃
Storage temperture	-20℃-+40℃
Storage humidity	20%-80%
Remarks	Customized available

2. Spectrum of α-ray Detector Based on CZT Crystal

3. α Series Energy Spectrum Detector’s Features

High energy resolution
Room temperature working;
Quick response
Working under visible light

4. Applications of CdZnTe α-ray Detector

Nuclear science & technology
Aerosol measurement
Hydrogen measurement

For more information, please contact us email at [email protected] and [email protected].

2019-04-23

Related Posts

What Is Chamfer in Semiconductor Wafer ?

Chamfer is to grind away the sharp edges and corners around the wafer. Its purpose is to make the mechanical strength of the wafer bigger prevent the wafer edge from cracking, to prevent damage caused by thermal stress, and to increase the flatness of [...]

2022-06-10meta-author

Toward high-quality 3C–SiC membrane on a 3C–SiC pseudo-substrate

Highlights •Elaboration of a smooth 3C–SiC membrane on a SiC substrate. •Faceted surface for the (110) orientation but smoother for the (111) orientation. •Roughness of the 3C–SiC membrane limited to 9 nm for the (111) orientation. •New MEMS devices feasible. •The huge SiC properties could be entirely exploited. The cubic [...]

2015-09-06meta-author 3c sic, SiC Substrate

Single Crystal Quartz Wafers

PAM XIAMEN offers Single Crystal Quartz Wafers. All single crystal quartz should be grown from one special seed. And the different cut type will cause the different seed location. One type is inside the wafer names “with seed”, the other type is not inside the wafers, so [...]

2019-02-27meta-author

1 – Materials and manufacturing techniques for silicon-on-insulator (SOI) wafer technology

1 – Materials and manufacturing techniques for silicon-on-insulator (SOI) wafer technology This chapter reviews various processes for manufacturing SOI wafers. There is a specific focus on Separation by IMplantation of OXygen (SIMOX) and on technologies based on direct bonding (bonded silicon-on-insulator (BSOI), epitaxial layer transfer process (Eltran®), [...]

2014-12-25meta-author soi waf, soi wafer bonding, soi wafer price, soi wafer supplier

Will the Novel Coronavirus-caused Pneumonia affect the company Resumption?

Will the Novel Coronavirus-caused Pneumonia affect the company Resumption? Post by PAM-XIAMEN, Feb.11,2020 The novel coronavirus-caused pneumonia affect the company resumption in short term, but not too much, as currently the epidemic is under control well by quarantine measures. Currently the reworking rate is >=75%, estimate [...]

2020-02-11meta-author

4″CZ Prime Silicon Wafer-12

PAM XIAMEN offers 4″CZ Prime Silicon Wafer-12 4″ CZ wafer, N type Orientation: (100)±0.5 Type/Dopant: n/phosphorus Resistivity: 1-5 Ω-cm Diameter: 100 mm Thickness: 525 ± 25 μm Surface: P/E Source: Prolog SEMI Prime, 1Flat, hard cst For more information, send us email at [email protected] and [email protected]

2020-04-23meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.