CZT Detector
PAM-XIAMEN supplies a series of CZT products, which are including detectors, modules, probes, systems, amplifiers, analyzers, supply and furnace.
- Description
Product Description
An extensive product line of CZT can be provided by PAM-XIAMEN, involving CZT detectors, CZT modules, CZT probes, CZT systems, CZT amplifiers, CZT analyzers, CZT supply and crystal growth furnace. Find more product details, please view below:
1. CZT Detector
1.1 CZT Pixilated Detector (old)
1.3 α/β/γ-ray Differentiation Detector
1.7 CZT High Resolution Pixel Detector (old)
1.8 CZT Photon Counting Linear Array Detector
1.9 CZT Compton Imaging Detector
1.10 CZT High-Density Pixel Detector
2. CZT Module
2.2 SPCW Wide Range Radiation Doses Module
2.3 Multi-pixel Spectral Imaging Module
2.4 CZT Multi-Pixel Photon Counting Module
3. CZT Probe
3.2 CZT Probe
3.4 CZT Probe-2
3.5 CZT α-ray Probe
4. CZT System
4.1 X-ray Photon Counting Imaging System (old)
4.2 MXA-128 X–ray Photon Counting Imaging System
4.3 CZT γ-ray Multi-pixel Imaging System
4.4 α-Ray Vacuum Testing System (new)
5. CZT Amplifier
5.1 Main-amplifier
5.2 Charge Sensitive Pre-amplifier Chip
5.3 Charge Sensitive Pre-amplifier (old)
5.4 CZT Preamplifier
6. CZT Analyzer
6.1 Analog Multi-channel Analyzer (old)
6.2 Portable Diagnostic Spectrum Analyzer
6.3 CZT Portable Spectrum Analyzer (old)
6.4 Digital Multi-Channel Analyzer (new)
7. Other CZT Products
7.2 Crystal growth furnace (old)
7.3 CZT Portable Radionuclide Identifier (new)
Therein, CZT based detectors from PAM-XIAMEN by solid-state detector technology for X-ray or gamma-ray has better energy resolution compared with scitillation crystal based detector. We list the specifications of CZT Planar Detector, CZT Pixilated Detector, CZT Co-Planar Gri Detector as follows for example:
| 1.1 CZT Pixilated Detector | ||
| Specifications | ||
| Application | SPECT、γ Camera | X-ray imaging |
| Operating temperature range | -20℃ ~ 40℃ | |
| Typical energy resolution | ＜6.5%@59.5 KeV | —— |
| Count rate | —— | ＞2M cps/pixel |
| Typical matrix | Area array detector: 8×8 | Area array detector: 8×8 |
| Linear array detector: 1×16 | Linear array detector: 1×16 | |
| The maximum dimensions of crystal | 40×40×5 mm 3 | |
| Note | Other electrode pattern can also be available | |
Standard 8×8 pixel CZT detector assembly
Standard 8×8 pixel CZT detector assembly
| 1.2 CZT Planar Detector | |||
| Specifications | |||
| HV | +200 V~ +500 V | ||
| Energy range | 20 KeV ~ 200 KeV | ||
| Operating temperature range | -20℃ ~ 40℃ | ||
| Size（mm 3 ） | 5×5×2 | 10×10×2 | |
| Energy resolution @59.5 KeV | Counter grade | ＞15% | ＞15% |
| Discriminator grade | 7% ~ 15% | 8% ~ 15% | |
| Spectrometer grade | ＜7% | ＜8% | |
| Note | Other sizes can also be available | ||
Standard 5×5×2mm 3 CZT assembly
Standard 10×10×2mm 3 CZT assembly
| 1.5 CZT Hemispherical Detector | ||
|
HV: +200 V ~ +1000 V |
Operating temperature range：-20℃ ~ 40℃ |
|
| Energy range: 50 KeV ~ 3 MeV | Typical energy resolution：＜3%@662 KeV | |
| Standard size（mm 3 ） ：4×4×2, 5×5×2.5, 10×10×5 | ||
| CZT Co-Planar Grid Detectors |
| Specifications |
| HV: +1000 V ~ +3000V |
| Energy range: 50 KeV ~ 3 MeV |
| Operating temperature range：-20℃ ~ 40℃ |
| Typical energy resolution：＜4%@662 KeV |
| Peak-to-Compton ratio: 3 ~ 5 |
| Standard size（mm 3 ）: 10×10×5, 10×10×10 |
At present, two important development directions of CZT detector are multiple large-volume parallel detectors and surface element array detectors. The former is composed of multiple CdZnTe crystal arrays with a volume greater than 1cm. This type of detector solves the shortcomings of a single detector, which is small in size and low in total detection efficiency, and greatly shortens the measurement time. It is especially suitable for portable spectrometer systems and can be used for radioactive monitoring in the environment, port, railway cargo, etc. The latter is composed of a CdZnTe crystal face element array, and this CZT detector technology is mainly used in energy spectrum imaging in nuclear medicine, astrophysics and other fields.
The development and use of CZT detector has made it possible to obtain high-efficiency photons with high performance. With the continuous improvement of high-quality CdZnTe semiconductor crystal preparation technology, further understanding of the carrier collection process and the development of rapid low-noise microelectronics, CdZnTe detector will surely be applied in a wider fields.
You may also like…
-
Test Wafer Monitor Wafer Dummy Wafer
As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
-
Ge(Germanium) Single Crystals and Wafers
PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility. -
Nanofabrication Photoresist
PAM-XIAMEN Offers photoresist plate with photoresist
-
Freestanding GaN substrate
PAM-XIAMEN has established the manufacturing technology for freestanding (gallium nitride)GaN substrate wafer, which is for UHB-LED and LD. Grown by hydride vapour phase epitaxy (HVPE) technology,Our GaN substrate has low defect density.
-
SiC Epitaxy
We provide custom thin film (silicon carbide)SiC epitaxy on 6H or 4H substrates for the development of silicon carbide devices. SiC epi wafer is mainly used for Schottky diodes, metal-oxide semiconductor field-effect transistors, junction field effect -
GaAs (Gallium Arsenide) Wafers
As a leading GaAs substrate supplier, PAM-XIAMEN manufactures Epi-ready GaAs(Gallium Arsenide) Wafer Substrate including semi-conducting n type, semi-conductor C doped and p type with prime grade and dummy grade. The GaAs substrate resistivity depends on dopants, Si doped or Zn doped is (0.001~0.009) ohm.cm, C doped one is >=1E7 ohm.cm. The GaAs wafer crystal orientation should be (100) and (111). For (100) orientation, it can be 2°/6°/15° off. The EPD of GaAs wafer normally is <5000/cm2 for LED or <500/cm2 for LD or microelectronics.
-
InAs wafer
PAM-XIAMEN offers Compound Semiconductor InAs wafer – indium arsenide wafer which are grown by LEC(Liquid Encapsulated Czochralski) as epi-ready or mechanical grade with n type, p type or semi-insulating in different orientation(111) or (100). In addition, InAs single crystal has high electron mobility and is an ideal material for making Hall devices.
-
CdZnTe (CZT) Wafer
Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
