GaAs based AlGaInP laser diode wafer can be supplied by PAM-XIAMEN with a band of 635nm. The III-V AlGaInP semiconductor material that can be lattice matched with the GaAs substrate has a wide direct band gap (1.9~2.3eV), a wide range of luminous wavelengths and [...]
2022-06-07Meta-Autor
AlN thin film, as a piezoelectric material with a wurtzite structure, has attracted much attention due to its excellent performance. However, compared with other piezoelectric materials such as Pb (ZrxTi1-x) O3 (lead zirconate titanate, PZT), pure AlN thin films exhibit poorer piezoelectric response. Doping [...]
2024-04-24Meta-Autor
Das SiC-Substrat und die SiC-Homoepitaxie von PAM-XIAMEN können für die Herstellung von MOSFET-Bauelementen bereitgestellt werden. Die MOSFET-Struktur aus Siliziumkarbid (SiC) wird hauptsächlich durch Nachahmung des Prozesses der Si-MOSFET-Struktur hergestellt. Hinsichtlich der Konfiguration werden MOSFET-Strukturen im Allgemeinen in zwei Bereiche unterteilt:
2022-04-11Meta-Autor
Silicon carbide has very stable characteristics, so that it can work stably in some harsh environments. Because of the stable chemical bonds, the technical threshold for silicon carbide production is very high. The growth conditions of silicon carbide crystal ingots are harsh, requiring high temperature (~2600℃) and high [...]
2021-04-23Meta-Autor
MPC-32 is a multi-pixel photon counting module. It can convert consecutive X-ray into digital signal in different energy region. It can reduce noise through setting electronic threshold value, thereafter reduce the influence of noise to image. Compared with traditional pseudo-dual energy, the five energy [...]
2019-04-24Meta-Autor
What are Silicon Wafer Flats?
PAM XIAMEN offers Silicon Wafer Flats
Since Silicon Wafers look basically the same! Flats are cut into the edge of the wafers so users could determine the wafer’s dopant-type and orientation.
Below is an example of silicon wafers flat specs:
Spec.
2”
3”
100mm
125mm
150mm
200mm
300mm
Diameter
2.000+/-.015”
3.000+/-.025”
100+/-.5mm
125+/-.5mm
150+/-.2mm
200+/-.2mm
300+/-.2mm
50.8+/-.38mm
76.2+/-.63mm
Thicknes s
0.011+/-.001”
0.015+/-.001”
525+/-20 um [...]
2019-02-15Meta-Autor
