PAM-XIAMEN can supply SiC substrates with various specifications, please get more info from: https://www.powerwaywafer.com/sic-wafer/sic-wafer-substrate.html
1. Significance of Research on Correlation Between Defect Rate and Mechanical Strength
It is well known that SiC defects have great negative impact to the electrical reliability and performance of chips; Their [...]
2024-04-01meta-author
The dependence of the morphology and crystallinity of an amorphous Ge (a-Ge) interlayer between two Si wafers on the annealing temperature is identified to understand the bubble evolution mechanism. The effect of a-Ge layer thickness on the bubble density and size at different annealing [...]
2019-11-13meta-author
New graphene fabrication method uses silicon carbide template
Graphene transistors. Georgia Tech researchers have fabricated an array of 10,000 top-gated graphene transistors, believed to be the largest graphene device density reported so far.
(PhysOrg.com) — Researchers at the Georgia Institute of Technology have developed a new [...]
2018-05-17meta-author
Towards the cost effective epitaxy of hillocks free CdZnTe film on (001)GaAs by close-spaced sublimation
Cost-effective epitaxy of hillocks free CdZnTe films on (001)GaAs was explored with close-spaced sublimation (CSS) technique. The orientation and film quality were studied with scanning electron microscopy (SEM), X-ray diffraction θ–2θ and Φ scans [...]
A phenomenon commonly encountered in grinding of silicon wafers is the grinding marks, which are difficult to remove by subsequent polishing process, and have been a great obstacle to the manufacture of silicon wafers with higher flatness. In this paper, the grinding marks formation [...]
PAM XIAMEN offers GGG single crystal.
Composition
GGG
YSGG
S-GGG(CaMgZr:GGG)
NGG
GYSGG
GSGG
Lattice constant
12.376 Å
12.426 Å
12.480 Å
12.505Å
12.507 Å
12.554 Å
Diffraction(2θ)
51º7′
50º44′
50º43′
50º41′
50º40′
50º22′
Melting Point
~1800 oC
~1877℃
~1730 oC
~1550 oC
~1730 oC
~1730 oC
GGG, (111), 5x5x0.5mm, 1sp
GGG, (100), 5x5x0.5mm, 1sp
GGG, (100), 5x5x0.5mm, 2sp
GGG, (110), 5x5x0.5mm, 1sp
GGG (111), 10x10x0.5mm, 2sp
GGG, (111), 10x10x0.5mm, 1sp
GGG, [...]
2019-04-26meta-author