preguntas frecuentes

Oblea de doble heteroestructura InGaAsP / InP

El material InGaAsP cultivado epitaxialmente sobre el sustrato InP es un material importante para la fabricación de dispositivos optoelectrónicos y de microondas. La longitud de onda de emisión de la estructura láser InGaAsP/InP cubre 1,0-1,7 μm, cubriendo dos ventanas de baja pérdida de 1,3 μm y 1,55 μm para la comunicación de fibra de sílice. Por lo tanto, InGaAsP se usa ampliamente en...

Obleas de arseniuro de galio, P/P

Q: Please let us know if you could supply below wafer, qty 25/50/300. Gallium Arsenide wafers, P/P 150.00±0.25 mm) 6"Ø×650±25µm, VGF SI undoped GaAs:-[100-2.0°towards[110]]±0.5°, u > 4,000cm²/Vs, Both-sides-polished, 1 Flat 57.5±2.5 mm @ 110±°1, TTV<7µm, BOW<4µm, Warp<10µm, TIR<6µm, Certificate: obligatory, Sealed under nitrogen in single wafer cassette A: Yes, will check the delivery time and come back to...

EPD para sustrato de GaAs

PAM-XIAMEN can supply GaAs wafer with EPD less than 5000/cm2. Q: Could you please advise guaranteed EPD for below substrate and epi? Gallium Arsenide wafers, P/E 2"Ø×380±25µm, LEC SI c doped GaAs:-[100]±0.5°, n-type Ro=(0.8E8-0.9E8)Ohmcm, One-side-polished, back-side matte etched, 2 Flats, LT-GaAs EPI: 1-2µm, Resistivity >1E7 Ohm-cm, Carrier lifetime <1ps, Sealed under nitrogen...

Gallium Arsenide Wafer, GaAs, VGF, semi aislante, sin dopar

Q: We would like to ask for below. (001) +/- 0.5o Orientation Semi Insulating, C doped Resistivity ≤ 1 – 10 x 108 Ohm-cm3 EPD ≤ 5000 cm-2 1 Side Polished (Ra < 10Å), EPI Ready, Back Side Etched US Semi Standard Flats, No Laser Markings Individual spider style wafer...

P: ¿Quiero saber la concentración dopante del sustrato SIC que normalmente proporciona? ¿Cuál es la máxima concentración de dopante de nitrógeno que puede proporcionar? ¿Estoy buscando obleas SIC dopadas con nitrógeno fuertemente?

Q:I want to know the dopant concentration of SiC substrate that you normally provide ? What is the maximum Nitrogen dopant concentration that you can provide? I am looking for heavily nitrogen doped SiC wafers? A: Our Nitrogen dopant concentration is 1E18/cm3-1E19/cm3, which belongs to heavy dopant.

P: ¿Puede ofrecer material mono de cristal SIC con alta conductividad térmica> 490 w/mk, obleas con espesor: 300-1000um para dispositivos semiconductores de fabricación de disipadores de calor?

Q:Can you offer SiC mono crystal material with high Thermal Conductivity > 490 W/mK, wafers with thickness: 300-1000um for semiconductor devices heat sinks manufacturing? A: Thermal Conductivity>  490 W/mK is theory value of SiC mono, however we tested some wafers, the thermal conductivity is below 450W/mK, which are lower the theory...

ha sido agregado a su carrito.
Verificar