Fe – Stainless Steel Substrate ( Polycrystaline)

PAM XIAMEN offers Fe – Stainless Steel Substrate ( Polycrystaline).

Stainless Steel Substrate (SUS301 HV200-HV600 ): 1″ Dia x 0.3 mm, as cold rolling

Stainless Steel Foil: SS316 0.1mm Thick x 300mm W x 4000 mm L

Stainless Steel Foam: SS316 1mm Thick x 250mm W x 250 mm L

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Quality is our first priority. PAM-XIAMEN has been ISO9001:2008, owns and shares four modern facories which can provide quite a big range of qualified products to meet different needs of our customers, and every order has to be handled through our rigorous quality system.Test report is provided for each shipment, and each wafer are warranty.

2019-05-08

Related Posts

Single-emitter LD Chip 1470nm @3W

Single-emitter LD Chip 1470nm @3W PAM200914-LD-CHIP-1470nm Brand: PAM-XIAMEN Wavelength: 1470nm Stripe width: 96um Output Power: 3W Cavity Length:2mm For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com

2019-05-09meta-author

Improvement in spontaneous emission rates for InGaN quantum wells on ternary InGaN substrate for light-emitting diodes

Improvement in spontaneous emission rates for InGaN quantum wells on ternary InGaN substrate for light-emitting diodes The spontaneous emission characteristics of green- and red-emitting InGaN quantum wells (QWs) on ternary InGaN substrate are analyzed, and the radiative recombination rates for the QWs grown on ternary substrate were compared with those of InGaN QWs on [...]

2014-04-02meta-author

GA2O3 BETA GALLIUM OXIDE WAFER AND CRYSTAL SUBSTRATES SEMI-INSULATING TYPE

PAM XIAMEN offers Ga2O3 Beta Gallium Oxide Wafer and crystal Substrates SEMI-insulating type. SPECIFICATIONS: Crystal structure: Monoclinic Lattice parameter: a = 12.225 A b = 3.040 A c = 5.809 A β = 103.7 degree Melt point (℃): 1725 Density: 5.95（g/cm3） Dielectric constants: 10 Band Gap: 4.8 – 4.9 eV Conductivity: Semi-insulating Breakdown Voltage (V/cm): 8 MV/cm Available Size: 5 x 5 mm, 10 x 10 mm，Ф1″ (1 inch diameter). Special [...]

2019-03-12meta-author

4″ CZ Prime Silicon Wafer Thickness 525 ± 25 µm

PAM XIAMEN offers 4″ CZ Prime Silicon Wafer Thickness 525 ± 25 µm. 4inch Prime CZ-Si wafer 4 inch (+/- 0.5 mm), thickness = 525 ± 25 µm, orientation (100)(+/-0.5°), 2-side polished, p or n type (no matter) , ? Ohm cm (no matter), [...]

2019-06-28meta-author

Advantages, challenges and countermeasures of GaN application in RF field

At present, gallium nitride (GaN) technology is no longer limited to power applications, and its advantages are also infiltrating into all corners of the RF/microwave industry, and the impact on the RF/microwave industry is growing, and should not be underestimated, because it can be [...]

2019-03-19meta-author

Fused Silica Quartz Wafers Inventory JGS1, JGS2 and JGS3 50μm – >1,000μm

You can buy fused silica quartz wafer from PAM-XIAMEN. It is usually made by smelting, cutting and grinding quartz, and the silica content of fused quartz wafer can reach more than 99.99%. The quartz hardness is seven on the Mohs scale, and it has the characteristics of high [...]

2019-02-27meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.