PAM XIAMEN offers 5″ Silicon Wafer.
Material
Orient.
Diam.
Thck
(μm)
Surf.
Resistivity
Ωcm
Comment
p-type Si:B
[100]
5″
635 ±15
E/E
FZ >5,000
p-type Si:B
[100]
5″
889 ±13
P/E
FZ >1,000
Prime
p-type Si:B
[100]
5″
920 ±10
E/E
FZ >1,000
p-type Si:B
[100]
5″
920 ±10
E/E
FZ >1,000
Warp measured <8μm
n-type Si:P
[100]
5″
400
P/E
FZ 7,000-14,300
SEMI Prime, Bow/Warp<20μm
n-type Si:P
[100]
5″
400
P/E
FZ 7,000-14,300
SEMI Prime, Bow/Warp<20μm
n-type Si:P
[100]
5″
350
P/E
FZ 5,000-10,000
SEMI Prime, Bow/Warp<20μm
n-type Si:P
[100]
5″
350
P/E
FZ 5,000-10,000
SEMI Prime, Bow/Warp<20μm, in Empak cassettes of 5 wafers
n-type Si:P
[111] ±0.1°
5″
200 ±15
BROKEN
FZ >3,000
Broken L/L wafers, in 2 pieces
n-type Si:P
[111]
5″
300 ±15
P/E
FZ 1,000-3,000
SEMI Prime, in [...]
2019-03-05meta-author
PAM XIAMEN offers LiNbO3 Crystal.
LiNbO3 Crystal has unique electro-optical, piezoelectric, photoelastic and nonlinear optical properties. They are strongly birefringent. They are used in laserfrequency doubling, nonlinear optics, Pockels cells, optical parametric oscillators, Q-switching devices for lasers, other acousto-opticdevices, optical switches for gigahertz frequencies, [...]
2019-05-07meta-author
PAM-XIAMEN offers 10*10mm2 SI (Semi-insulating) Freestanding GaN Substrate, which has a resistivity greater than 106 ohm-cm. Semi-insulating gallium nitride substrate with the advantages high critical breakdown electric field and good thermal stability are widely used in high-frequency and high-power devices. Following listed is one of the specifications:
1. [...]
2020-08-17meta-author
PAM XIAMEN offers CeO2 Epi Film on YSZ.
CeO2 Film (40 nm one side) on YSZ <100> 10x10x0.5 mm
Epitaxial thin Film Composition
<100> CeO2
Epitaxial Film Thickness
40 nm +/- 10 nm
Growth method
Spin coating
Epitaxial FWHM
< 5 o
Substrate
<100>, YSZ, 10x10x0.5 mm, one side polished
CeO2 Film (40 nm one side) on YSZ [...]
2019-04-19meta-author
PAM XIAMEN offers 3″ Dummy grade silicon wafer Thickness:340-380μm.
3″ Dummy grade / Mechanical Grade silicon wafer, SSP.
MUST be Single Side Polished and Single Crystal Silicon.
Thickness 340-380μm, no scratch, no films, no etch patterns or residues
For more information, please visit our [...]
2019-08-22meta-author
Pure silicon is more like an insulator than a conductor, and when external forces are applied (such as applied voltage), it has no ability to change its conductive state. So other elements must be doped into silicon, and the two most important dopants are boron (B) and [...]
2023-08-10meta-author