In — Indium Foil

PAM XIAMEN offers Indium Foil.

Indium ( In ) Foil: 100 mm (W) x 100 mm ( L） x 0.1 mm ( T)

Polycrystal In Foil
Purity:   > 99.995%
Size:     0.10 mm thickness x 100mm width x 100 mm Length
Surface finish:  as cold rolling < 100 A
Packing:   in double layers vacuumed bag, and drying agent between two layers
Application: Heat think and thermal interface material for wafers

Indium Physical Properties:
vapor pressure <0.01 mmHg ( 25 °C)
assay 99.999% trace metals basis
form foil
resistivity 8.37 μΩ-cm
thickness 0.1 mm
mp 156.6 °C(lit.)
density 7.3 g/mL at 25 °C(lit.)

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at [email protected] and [email protected]

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

With more than 25+years experiences in compound semiconductor material field and export business, our team can assure you that we can understand your requirements and deal with your project professionally.

2019-05-08

Related Posts

Test grade silicon wafers-2

PAM XIAMEN offers test grade silicon wafers Below is just a short list of the test grade silicon substrates! Inches Cust class Dopant Type Orientation PFL length PFL direction SFL Off orientation Resistivity Diameter Thickness Bow TTV Warp 4 DSP Boron P 100 32,5 ± 2,5 110 ± 1 0.0 ± 1.0° 1 – 100 Ohmcm 100 ± 0.3 mm 302 ± 4 µm 35 4 35 4 DSP Boron P 100 32,5 ± 2,5 110 ± 0,50 90 ± 5.0 °, [...]

2019-02-25meta-author

50.8mm (2 Inch) Silicon Wafers-1

PAM XIAMEN offers 50.8mm Si wafers. Please send us email at [email protected] if you need other specs and quantity. Item Material Orient. Diam (mm) Thck (μm) Surf. Resistivity Ωcm Comment PAM1947 P/B [100] 2″ 280um P/E 0-100 ohm-cm Test Grade with flat PAM1948 N/Ph [100] 2″ 280um P/E 0-100 ohm-cm Test Grade with flat PAM1949 P/B [100] 2″ 280um P/E 1-10 ohm-cm Prime Grade with Flat PAM1950 N/Ph [100] 2″ 280um P/E 1-10 ohm-cm Prime Grade with Flat PAM1951 P/B [100] 2″ 280um P/E 0.001-0.005 ohm-cm Prime Grade with Flat PAM1952 P/B [111] 2″ 280um P/E 1-10 ohm-cm Prime Grade with Flat PAM1953 P/B [111] 2″ 280um P/E 0.001-0.005 ohm-cm Prime Grade with [...]

2019-02-18meta-author

4″ Silicon Wafer-12

PAM XIAMEN offers 4″ Silicon Wafer. Material Orient. Diam. Thck (μm) Surf. Resistivity Ωcm Comment n-type Si:P [100] 4″ 525 P/P 1-100 SEMI Prime, TTV<5μm n-type Si:P [100] 4″ 525 P/E 0.3-0.5 SEMI n-type Si:P [100] 4″ 300 P/E 0.29-0.31 SEMI Prime n-type Si:P [100] 4″ 200 P/P 0.10-0.15 SEMI Test, Not sealed both sides scratched n-type Si:P [100] 4″ 200 P/P 0.10-0.15 SEMI Test, Both sides with scratches n-type Si:P [100] 4″ 200 P/E 0.10-0.15 SEMI Prime, Front-side Prime, Back-side Test grade polish n-type Si:Sb [100] 4″ 525 P/E 0.020-0.022 Prime n-type Si:Sb [100-6° towards[110]] ±0.5° 4″ 525 P/E 0.015-0.020 SEMI Prime n-type Si:Sb [100] 4″ 525 P/E 0.011-0.014 Prime n-type Si:Sb [100] 4″ 305 ±3 P/P 0.010-0.025 SEMI Prime, TTV<1μm n-type Si:Sb [100] 4″ 525 P/E 0.01-0.02 SEMI Prime, TTV<5μm n-type Si:Sb [100] 4″ 525 P/E 0.01-0.02 SEMI Prime n-type Si:As [100] 4″ 525 P/E 0.0025-0.0035 SEMI Prime n-type [...]

2019-03-05meta-author

6″ Silicon EPI Wafer

PAM XIAMEN offers 6″ Silicon EPI Wafers. Substrate EPI Comment Size Type Res Ωcm Surf. Thick μm Type Res Ωcm 6″Øx675μm n- Si:P[100] 0.001-0.002 P/EOx 3.2 ±0.2 n- Si:P 0.32-0.46 n+/n++ For more information, please visit our website: https://www.powerwaywafer.com, send us email at [email protected] and [email protected] Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China.PAM-XIAMEN develops advanced crystal [...]

2019-03-08meta-author

Al2O3 (Sapphire)-1

PAM XIAMEN offers high-quality Al2O3 (Sapphire). A-plane (11-20) Al2O3 – Sapphire Wafer 5x5x0.5 mm, A plane (11-20), 2 SP Al2O3 – Sapphire Wafer 5x5x0.5 mm, A plane (11-20),1 SP Al2O3 – Sapphire Wafer 10x5x0.5 mm , A plane (11-20), 1 SP Al2O3 – [...]

2019-04-16meta-author

Custom Silicon Wafers

Custom Silicon Wafers PAM XIAMEN offers custom silicon Wafers from thinning or reclaiming substrates that you already have to making silicon cubes. We can laser cut or dice wafers into diameters and dimensions that you need. Below is just some of the custom silicon wafer services that [...]

2019-02-13meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.