Indium Tin Oxide Coated Glass

Indium Tin Oxide Coated Glass

PAM XIAMEN offers Indium Tin Oxide Coated Glass.

MAIN PRODUCTS

ITO coated glass
ITO coated plastic film (PET, PEN, etc)
Fluorine-tin-oxide FTO coated glass
FPD and ITO glass detergents

We have the following Indium Tin Oxide wafers. Please let us know if any interest you.

Item Dia Thk Description
PAM3343 25mm Sq 1.1mm 15-20 ohm/sq ITO glass Size: 25mm x 25mm Please specify thickness from 1.1 or 0.7mm
PAM3344 75mm x 25mm 0.7mm 5-20 ohm/sq ITO glass Size: 75mm x 25mm Please specify thickness from 1.1 or 0.7mm O
PAM3345 50mm Sq 0.7mm ITO coated boro-aluminosilicate glass 50mm x 50mm x 0.7mm ​​Non-alkaline TFT grade
PAM3346 150mm Sq 1.1mm 10 ohm/sq ITO coated polished glass Size: 150mm x 150mm Specify thickness 1.1 or 0.7mm

< 10 ohm/sq ITO coated SiO2 wafer
Surface: Polished grade
Size: 4″ dia. x 0.55mm

——————–
<20 ohm/sq ITO coated SiO2 wafer
ITO thickness: ~ 100nm +/-10nm
Surface: Polished grade
Size: 4″ dia. x 1.1mm

——————–
<20 ohm/sq ITO coated SiO2 wafer
ITO thickness: ~ 100nm +/-10nm
Surface: Polished grade
Size: 4″ dia. x 0.7mm

——————–
< 10 ohm/sq ITO coated SiO2 wafer
Surface: Polished grade
Size: 4″ dia. x 1.1mm

——————–
< 10 ohm/sq ITO coated SiO2 wafer
Surface: Polished grade
Size: 4″ dia. x 0.7mm

——————–
<7 ohm/sq ITO coated SiO2 wafer
Surface: Polished grade
Size: 4″ dia. x 1.1mm

——————–
<7 ohm/sq ITO coated SiO2 wafer
Surface: Polished grade
Size: 4″ dia. x 0.7mm

——————–
<7 ohm/sq ITO coated SiO2 wafer
Surface: Polished grade
Size: 4″ dia. x 0.7mm

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China.PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices.PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

With more than 25+years experiences in compound semiconductor material field and export business, our team can assure you that we can understand your requirements and deal with your project professionally.

2019-02-27

Share this post

Related Posts

Barrier controlled carrier trapping of extended defects in CdZnTe detector

Highlights •The barrier controlled trapping model was developed around extended defects. •Electron mobility and E-field distribution were distorted by space charge depletion region. •Extended defects act as a recombination-activated region. •The relationships between extended defects and detector performance were established. Transient current techniques using alpha particle source were utilized [...]

2015-07-31meta-author , , ,
150mm 4H n-type SiC EPI wafers

150mm 4H n-type SiC epi wafer with excellent uniformity and extremely low defect density is available. SiC epitaxial wafer refers to a silicon carbide wafer on which a single crystal film (epitaxial layer) with certain requirements and the same crystal as the substrate is grown on a silicon [...]

2020-03-10meta-author
Differential Magnetoresistive Sensor

Differential magnetoresistive sensor for sale from PAM-XIAMEN is one of magnetoresistive sensors, which is packaged by indium antimonide (InSb) thin film magnetoresistor plus bias magnet with a metal shell. As a result, the output signal is a quasi-sine wave signal. The specification of differential magnetoresistive (MR) [...]

2021-08-03meta-author
Physicists reveal material for high-speed quantum internet

Physicists reveal material for high-speed quantum internet Electrical excitation causes a point defect in the crystal lattice of silicon carbide to emit single photons, which are of use to quantum cryptography. Credit: Elena Khavina, MIPT Researchers from the Moscow Institute of Physics and Technology have rediscovered [...]

2018-07-25meta-author
Semiconductor Science and Technology The influence of growth conditions on the quality of CdZnTe single crystals

Experimental conditions were investigated for growth of inclusion-free near-stoichiometric CdZnTe single crystals with a minimized concentration of native point defects. The positions of the stoichiometric line PS = 8×105exp (-1.76×104/T) (atm) and the room-temperature and high-temperature p-n lines were evaluated from high-temperature in situ [...]

2019-07-16meta-author
Researches on Point Defects of Silicon Carbide

Defects of Silicon Carbide can bring about different natures, and these natures often need to be avoided. However, they have a positive effect in using. The representative utilization of the defects is a variety of point defects of silicon carbide. What Are Point Defects of [...]

2021-03-30meta-author