InP Based Schottky Barrier Diode Epiwafer *S
Schottky barrier diodes (SBDs) are widely used in the microwave and millimeter wave frequency ranges. Due to its ultra fast transmission mechanism, Schottky barrier diode can be extended to very high frequencies by reducing the physical contact area. Nowadays, SBD has been widely used in the THz range. They are commonly used as detectors, mixers, multipliers, and phase shifters in terahertz circuits. The electron mobility based on InP substrate material can reach 8000cm/(V.s) at room temperature. Compared with other III-V compound materials used, InP material has the highest electron mobility, which is more conducive to the fabrication of terahertz Schottky diodes. PAM-XIAMEN can epitaxially grow InP epiwafers for fabricating Schottky barrier diodes, the specific structure is as follows for reference only:
1. InP Based Schottky Barrier Diode Epitaxial Structure
No. 1 InP Homoepitaxy for SBD
| Epi Layer | Thickness | Doping |
| n- InP | – | – |
| n+ InP substrate | 350um |
No. 2 InGaAs/InP Heteroepitaxy for SBD
| Epi Layer | Thickness | Doping |
| n- InGaAs | – | – |
| n+ InGaAs | – | – |
| SI InP substrate | 350um |
2. Schottky Barrier Diode Characteristics Based on InGaAs/InP Material System
Due to their high electron mobility and strong breakdown resistance, GaAs Schottky barrier diodes have been effectively utilized in terahertz circuits. However, the high forward conduction voltage caused by the Schottky diode barrier height limits the use of GaAs diodes in zero-bias terahertz detectors. Another drawback is that the permissible doping level of N-type GaAs is insufficient to achieve very low ohmic resistivity. In contrast, InP-based Schottky barrier diodes, with lattice-matched InGaAs, offer smaller potential barriers than GaAs diodes, resulting in significantly lower conduction voltages. In terahertz detector circuits, zero-bias operation is highly desired, as eliminating the DC bias power supply can significantly reduce shot noise in detectors.
The low forward conduction voltage of InP-based Schottky barrier diodes enables zero-bias operation, enhancing noise performance. Additionally, by removing the DC bias, terahertz detection circuits become simpler and more compact. In applications like terahertz mixers and frequency multipliers, lower conduction voltages help reduce losses in the circuits.
Furthermore, the doping concentration of N-type InP materials is significantly higher than that of N-type GaAs. Heavily doped N-type InGaAs layers can achieve extremely low ohmic resistivity. This low resistance allows InP-based Schottky barrier diodes to reach higher cutoff frequencies than GaAs diodes. These advantages make InP-based Schottky barrier diodes particularly well-suited for terahertz mixers, frequency multipliers, and detector circuits.
For more information, please contact us email at [email protected] and [email protected].