PAM XIAMEN offers SrTiO3 single crystal.
SrTiO3 single crystal provides a good lattice match to most of materials with Perovskite structure. It is an excellent substrate for epitaxial film of HTS and many oxide. It has been used widely for special optical windows and as high quality sputtering [...]
2019-05-14meta-author
PAM-XIAMEN can offer metallized diamond heat sink for solving the poor bonding force between diamond and the matrix and the early falls of the diamond due to high interface energy with most metals, ceramics, etc. A metallized diamond heat sink compound refers to plating metal on [...]
2021-06-11meta-author
PAM XIAMEN offers 4″ Silicon Wafer.
Material
Orient.
Diam.
Thck
(μm)
Surf.
Resistivity
Ωcm
Comment
n-type Si:P
[111] ±0.5°
4″
630
P/G
FZ >7,000
SEMI Prime, Lifetime>1,000μs, Back-side Fine Ground
n-type Si:P
[111] ±0.5°
4″
675
P/E
FZ >7,000
SEMI, Lifetime>1,600μs,settes of 6 and 8 wafers
n-type Si:P
[111] ±0.5°
4″
675
P/E
FZ >7,000
SEMI, Lifetime>1,600μs
n-type Si:P
[111] ±0.5°
4″
675
P/E
FZ >7,000
SEMI TEST (Scratches, Lifetime>1,600μs
n-type Si:P
[111] ±0.25°
4″
675
P/E
FZ 7,000-10,000
SEMI Prime, Lifetime>1,000μs, Light scratches
n-type Si:P
[111] ±0.5°
4″
525
P/E
FZ >5,000
SEMI Prime, Lifetime>1,000μs
n-type Si:P
[111-1° towards[110]] ±0.5°
4″
525
P/E
FZ >5,000
SEMI TEST (scratches on back-side)
n-type Si:P
[111] ±0.25°
4″
675
P/E
FZ 5,000-7,000
SEMI Prime, [...]
2019-03-05meta-author
Computer modeling of surface interactions and contamin
Highlights
•
Dynamics of contaminant removal from the surface of micro/nanotrench is simulated.
•
The trench is rectangular and made of one or two different materials.
•
Various diffusivities and surface characteristics are considered in the model.
•
In multimaterial trench, cleaning dynamics strongly depends on [...]
Gallium nitride semiconductors
GaN is a compound semiconductor on steroids! if you could make a 10 Watt part on GaAs at a particular frequency, you can probably make a 100 watt part on GaN right now.
Gallium nitride is the future of microwave power amps, GaAs has exceeded its [...]
When SiC wafer is used as the substrate of RF devices, it is required that SiC should be semi insulating and its resistivity should be greater than 10 ^ 6 Ω· cm. In fact, the resistivity of silicon carbide should be very high, but [...]
2020-08-25meta-author