PAM XIAMEN offers 4″ Silicon Wafer.
Material
Orient.
Diam.
Thck
(μm)
Surf.
Resistivity
Ωcm
Comment
p-type Si:B
[110] ±0.5°
4″
500
P/E
FZ >10,000
Prime, TTV<5μm
p-type Si:B
[110] ±0.5°
4″
200
P/P
FZ 1-2
SEMI Prime
p-type Si:B
[110] ±0.5°
4″
200
P/P
FZ 1-2
Prime
p-type Si:B
[110] ±0.5°
4″
200
P/P
FZ 1-2
SEMI Prime, Extra 8 scratched wafers in cassette free of charge
p-type Si:B
[100]
4″
220 ±10
P/E
FZ >10,000
SEMI Prime
p-type Si:B
[100]
4″
230 ±10
P/E
FZ >10,000
SEMI Prime
p-type Si:B
[100-4° towards[110]] ±0.5°
4″
525
P/E
FZ >2,000
SEMI Prime, TTV<5μm
p-type Si:B
[100]
4″
450
P/P
FZ 1,000-2,000
SEMI Prime
p-type Si:B
[100]
4″
420
C/C
FZ 850-900
SEMI Prime
p-type Si:B
[100]
4″
200 ±10
P/P
FZ 100-120
SEMI Prime
p-type Si:B
[100]
4″
250
P/P
FZ 1-3 {0.97-1.01}
SEMI [...]
2019-03-05meta-author
The global demand for ultra-bright blue and green LEDs has driven the development of LED nitride wafer technologies. Among them, sapphire substrate is currently the most common substrate material in GaN epitaxial growth, and it is also the substrate of epitaxial GaN material with [...]
2022-03-25meta-author
Electrical and structural properties of GaN films and GaN/InGaN light-emitting diodes grown on porous GaN templates fabricated by combined electrochemical and photoelectrochemical etching
Highlights
•Porous GaN template was prepared by electrochemical and photoelectrochemical etching scheme.
•InGaN/GaN light-emitting diode (LED) structure was overgrown on the etched GaN template.
•Overgrown [...]
SiC has, during the last few years, become increasingly important as a power-device material for high voltage applications. The thick, low-doped voltage-supporting epitaxial layer is normally grown by CVD on 4° off-cut 4H-SiC substrates at a growth rate of View the MathML source
using silane [...]
808nm laser diode wafer is offered by PAM-XIAMEN on N-type GaAs substrate. According to the material used in the active area, the LD wafer is mainly divided into two kinds with aluminum and without aluminum. More details please see below:
1. Laser Diode Wafer Specs
No. 1 808nm Epi Wafer [...]
2019-03-13meta-author
Carbon neutrality refers to through afforestation, energy saving and emission reduction, etc., to offset the carbon dioxide or greenhouse gas emissions generated by itself, to achieve positive and negative offset, to achieve relatively “zero emissions”. Only by reducing energy consumption can carbon emissions be [...]
2022-06-02meta-author