Boron Nitride Film on Silicon Wafer

  • Home
  • News
  • Boron Nitride Film on Silicon Wafer

Boron Nitride Film on Silicon Wafer

PAM XIAMEN offers Boron Nitride Film on Silicon Wafer.

Boron Nitride Film on Silicon Wafer , 24 nm / 4″ — BN-Si-100-24nm

Boron nitride is a chemical compound with chemical formula BN, consisting of equal numbers of boron and nitrogen atoms. BN is isoelectronic to a similarly structured carbon lattice and thus exists in various crystalline forms. The Cubic (sphalerite structure) bariety analogous to diamond is called c-BN. Its hardness is inferior only to diamond, but its thermal and chemical stability is superior. Low-pressure deposition of thin films of boron nitride are grown on Si (100) wafers for this product.

BN Film coated by sputtering method
BN Thickness:  24 nm +/- 10%
Silicon Wafer Specifications:

Conductive type:        Si   n- type
Resistivity:                  0.1-1.0 ohm-cm
Size:                          4″ diameter +/- 0.5 mm   x 0.525 +/- 0.025 mmth
Orientation:                (100) +/- 0.5o
Polish:                        One  sides  polished
Surface roughness:     Prime

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

You can get our free technology service from enquiry to after service based on our 25+ experiences in semiconductor line.

2019-04-26

Share this post

Related Posts

A Plane Si-GaN Freestanding GaN Substrate

PAM-XIAMEN offers A Plane Si-GaN Freestanding GaN Substrate Item PAM-FS-GAN A-SI Dimension 5 x 10 mm2 or 5 x 20 mm2 Thickness 380+/-50um Orientation A plane (11-20) off angle toward M-axis 0 ±0.5° A plane (11-20) off angle toward C-axis -1 ±0.2° Conduction Type Semi-Insulating Resistivity (300K) > 10 6Ω·cm TTV ≤ 10 µm BOW  BOW ≤ 10 µm Surface Roughness: Front side: Ra<0.2nm, epi-ready; Back side: Fine Ground or polished. Dislocation Density ≤ 5 x 106 cm-2 Macro Defect Density 0 cm-2 Useable Area > 90% (edge exclusion) Package each in single wafer container, under nitrogen atmosphere, packed in class 100 clean room   For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com

2020-08-17meta-author
Numerical simulation of pixellated CdZnTe detector for medical radionuclide imaging application

Numerical simulation of pixellated CdZnTe detector for medical radionuclide imaging application The recent development of CdZnTe detectors has made it possible to produce CdZnTe based clinical radionuclide imagers. We therefore investigate the pixellation geometry ideal for this application using numerical simulation. These studies indicate that, for a fixed pixel [...]

2014-04-25meta-author
Method for modulating the wafer bow of free-standing GaN substrates via inductively coupled plasma etching

Method for modulating the wafer bow of free-standing GaN substrates via inductively coupled plasma etching The bowing curvature of the free-standing GaN substrate significantly decreased almost linearly from 0.67 to 0.056 m−1 (i.e. the bowing radius increased from 1.5 to 17.8 m) with increase in [...]

2016-02-03meta-author ,
Epitaxial Growth of GaAs MESFET Heterostructure

PAM-XIAMEN provides GaAs epiwafer for MESFET devices, which is one FET epitaxial structure with modulated doping. Detailed epitaxial growth heterostructure is listed below for your reference. The electron migration rate of GaAs is 5.7 times higher than that of silicon, which is very suitable [...]

2022-12-09meta-author
PAM-XIAMEN Offers AlGaN material

Xiamen Powerway Advanced Material Co.,Ltd., a leading supplier of AlGaN and other related products and services announced the new availability of size 2”  is on mass production in 2017. This new product represents a natural addition to PAM-XIAMEN’s product line.   Dr. Shaka, said, “We are pleased to [...]

2017-11-08meta-author
Thick Silicon Carbide Substrate

As one of leading silicon carbide wafer manufacturers, PAM-XIAMEN offers you SiC substrate with 1mm or 2mm thickness. Silicon carbide (SiC) substrate is the cornerstone of the application of gallium nitride (GaN) and silicon carbide in the third generation of semiconductor materials. In recent years, [...]

2022-05-10meta-author