MgO single crystal substrate-3

MgO single crystal substrate-3

PAM XIAMEN offers MgO single crystal substrate.

MgO is an excellent single crystal substrate for thin films of Ferro magnetic, Photo-electronic and high Tc superconductor materials. PAM XIAMEN uses a special arc melting method to grow high purity MgO crystal in sizes up to 2”x2”x 1” at lower cost, and employs CMP method to prepare high quality substrates with atomic level smoothness.

MgO Substrates (111)

MgO (111) Substrate 5x5x0.5 mm 1SP

MgO (111) Substrate 5x5x0.5 mm , 2SP

MgO (111) Square substrate 0.25″x0.25″x0.5mm , 1SP

MgO (111) Substrate 10×10 x0.25 mm, 1SP

MgO (111) Substrate 10×10 x0.5 mm, 1SP

MgO (111) Substrate 10×10 x0.5 mm, 2SP

MgO (111) Substrate 10×10 x1.0 mm, 1SP

MgO (111) Substrate 10×10 x1.0 mm, 2SP

MgO (111) Square substrate 0.5″ x0.5″ x0.5 mm , 1SP

MgO (111) Square substrate 1″ x 1″x 0.5 mm , 1SP

MgO (111) wafer 1″ Dia x0.5mm, 2SP

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

You can get our free technology service from enquiry to after service based on our 25+ experiences in semiconductor line.

2019-05-13

Share this post

Related Posts

Bubble evolution mechanism and stress-induced crystallization in low-temperature silicon wafer bonding based on a thin intermediate amorphous Ge layer

The dependence of the morphology and crystallinity of an amorphous Ge (a-Ge) interlayer between two Si wafers on the annealing temperature is identified to understand the bubble evolution mechanism. The effect of a-Ge layer thickness on the bubble density and size at different annealing [...]

2019-11-13meta-author
Fabrication of GaN wafers for electronic and optoelectronic devices

Fabrication of GaN wafers for electronic and optoelectronic devices The fabrication of GaN wafers from GaN boules (ingots) is described. Gallium nitride boules were grown by hydride vapor phase epitaxy and sliced and sized into wafer blanks. The GaN wafer blanks were lapped and polished. [...]

2013-09-26meta-author , , ,
CVD Single Crystal Diamond

Single crystal diamond for sale from PAM-XIAMEN is grown by chemical vapor deposition (CVD), which is a method of decomposing hydrogen and hydrocarbon gas into hydrocarbon active groups at high temperature, and depositing diamond on the substrate material under certain conditions. Theoretically, the method is [...]

2019-04-19meta-author
Osram Laboratory Reports 142 lm/W Efficiency Record for Warm

Osram Laboratory Reports 142 lm/W Efficiency Record for Warm White LED Light Source March 15, 2011…Osram Opto Semiconductors reports that it has set a new laboratory record of 142 lm/W for the efficiency of a warm white LED light source. The LED with a correlated [...]

2012-03-06meta-author
Monitoring defects in III–V materials: A nanoscale CAFM study

Highlights •Nanoscale defects in III–V materials, grown over Si were characterized with CAFM. •The defects exhibit higher conductivity. •The contact rectifying feature is hide by a larger current under the reverse bias. •Patterned samples fabricated using Aspect Ratio Trapping were also characterized. Abstract The implementation of high mobility devices requires [...]

2015-04-29meta-author , ,
3″LiNbO3 single crystal thin film

PAM XIAMEN offers 3″LiNbO3 single crystal thin film LiNbO3 single crystal thin film (X，Y，Z), X-cut 10μm; Substrate: 3″ Si 0.5 0.4mm;(PAM-P20412-LNOI ) Structure:Top layer: LiNbO3 single crystal thin film X-cut 10 μm Substrate: 3″ Si 0.4mm, Resistivity >10,000Ωcm Surface Roughness<0.5nm TTV (Thickness Uniformity) <1.2μm, 17 [...]

2020-03-24meta-author