PAM-256 multi-pixel energy spectrum imaging module is composed of one or several imaging unit. The CZT imaging unit is made of 16×16 pixel detector. With back-end ASIC, it can detect energy ranges from 10KeV~700KeV, fully satisfied γ camera and SPECT.
Direct splice: The module has a time sequence interface and a bias circuit. Added with FPGA, ADC and layout circuit, it will readout.
Indirect using: Systemize the module and design for special environment.
Splicing methods: USE TCP/IP or USB interface.
1. CZT Imaging Module Specification
(PAM200220-CZT)
CZT dimension | 25.4×25.4×5 mm3 |
Pixel size | 1.5×1.5 mm2 |
Pixel array | 16×16 |
Energy resolution | 90%pixels<6.5%@122KeV 25℃ |
Parameter configuration | SPI interface |
Signal readout | All pixels can be read out at the same time |
Interface | Dasisy-chained connector |
Detection range | 20KeV~700MeV |
Power | 240mW/module |
Module dimension | 25.5×25.5×30 mm3 |
Defective pixel | <6 pixels/module |
Splicing | 360° splicing with none-blind area |
2. Multi-pixel Energy Spectrum Imaging Module Spectrum & Structure
For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com.