Q:We request for the following items
1. Silicon (Si) single crystal wafers, polished on one side N-type, orientation<100>, Resistivity 5E-3 ohm.cm, Thickness: 0.1 to 0.5 mm
2. Silicon (Si) single crystal wafers, polished on one side P-type, orientation <100>, Resistivity 5E-3 ohm.cm, Thickness: 0.1 to 0.5 [...]
Q: Please let us know if you could supply below wafer, qty 25/50/300.
Gallium Arsenide wafers, P/P
150.00±0.25 mm) 6″Ø×650±25µm,
VGF SI undoped GaAs:-[100-2.0°towards[110]]±0.5°,
u > 4,000cm²/Vs,
Both-sides-polished, 1 Flat 57.5±2.5 mm @ 110±°1,
TTV<7µm, BOW<4µm, Warp<10µm, TIR<6µm,
Certificate: obligatory, Sealed under nitrogen in single wafer cassette
A: Yes, will check the [...]
2018-09-13meta-author
Q:For 4” pss wafer, the light comes out from the p-GaN side not from sapphire, so I can’t do flip chip packaging. Also I don’t know whether laser liftoff is possible for pss wafer.
Is it possible you can share any image of the etched surface of [...]
2018-06-19meta-author
Q We actually want to check our reflectance (mirror type) measurement method on an LED structure on a PSS wafer. Would it be possible to get the same LED structure on both a PSS wafer and a single-side polished wafer so we can compare [...]
2018-06-19meta-author
Q:In the test report of blue LED wafers,it shows Vf and IV (mcd). How is this mcd being measured without actually processing the wafer into devices?
A:We use prober equipment and contact positive and negative pole, connect current, and then get the voltage and IV.
2018-06-19meta-author
Q:Can you supply 4″ AlGaAs epi wafers for IR LEDs?
A:Yes, we can offer 850nm or 620nm for 4” size.