Design-dependent gauge factors of highly doped n-type 4H-SiC piezoresistors

Design-dependent gauge factors of highly doped n-type 4H-SiC piezoresistors

This paper presents the experimentally obtained gauge factor (GF) of 4H-SiC piezoresistors, fabricated out of the n-type epitaxial layer and characterized on millimeter-size SiC cantilever beams at room temperature. It was found that the GF is dependent on the piezoresistor’s length and width. Piezoresistors narrower than approximately 30 µm showed a width-dependent GF. The highest GF of 20.8 was obtained with a single element piezoresistor in transverse orientation. In longitudinal orientation, the highest GF was −10, which was obtained with a clustered piezoresistor with plural identical elements. Essential factors to consider for the design of optimum 4H-SiC piezoresistors for a Wheatstone bridge configuration are presented.

soource:iopscience

send us email at angel.ye@powerwaywafer.com or powerwaymaterial@gmail.com

Share this post