La3Ga5SiO14 crystals

PAM XIAMEN offers La3Ga5SiO14 crystals.

Langasite- La3Ga5SiO14 crystals is a new piezoelecrictric materials with the value of electromechanical coupling coefficient, which is, intermediate between this coefficient of a quartz crystal and that of lithium tantalate.

Characteristics\Crystals	Quartz, SiO₂	Langasite, La₃Ga₅SiO₁₄	Lithium tetraborate, Li₂B₂O₃	Lithium tantalate, LiTaO₃
Electromechanical Coupling Factor K²_emc, % (BAW)	7	15.8	24	47
Frequency Spacing Δf, %	0.25	0.9	4	7
Q-factor Q, ×10³	100	50	10	2
Temperature Frequency Coefficient TFC, ×10^-6/°C	0.5	1.6	6	4

LGS(0,138.5,26.7) Wafer: 10x10x0.5 mm, One Side Polished

LGS(0,138.5,26.7) Wafer: 3″ Dia x 0.5 mm, One Side Polished

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

You can get our free technology service from enquiry to after service based on our 25+ experiences in semiconductor line.

2019-05-07

Related Posts

PbS single crystal

PAM XIAMEN offers PbS single crystal. The sulfate ion is a polyatomic anion with the empirical formula SO2−4 and a molecular mass of 96.06 daltons (96.06 g/mol); it consists of a central sulfur atom surrounded by four equivalent oxygen atoms in a tetrahedral arrangement. [...]

2019-05-14meta-author

SRTIO3 STO STRONTIUM TITANATE CRYSTAL SUBSTRATES

PAM XIAMEN offers SrTiO3 STO Strontium Titanate Crystal Substrates. Main Parameters Crystal structure M6 Growth method Blaze method Unit cell constant a=3.905Å Melt [...]

2019-03-14meta-author

150mm (6 Inch) Silicon Wafers

PAM XIAMEN offers 150mm Si wafers. Please send us email at sales@powerwaywafer.com if you need other specs and quantity. Item Dia Type Dopant Orien Res (Ohm-cm) Thick (um) Polish Grade Description PAM2716 150mm N/A 650um SSP MECH Low cost Si Wafer great for spin coating. PAM2717 150mm P B <100> 0-10 620 um SSP Test Test Grade Silicon great for wafer processing studies. PAM2718 150mm N <100> 0-100 625um SSP Test 6″ diameter (150mm), silicon wafers, N-type. PAM2719 150mm P B <100> 0.006-0.012 525um SSP Test With Oxide Back Seal PAM2720 150mm P B <100> 1-100 500um SSP Test 2 SEMI-STD FLATS WHERE [...]

2019-02-20meta-author

Investigation of the limitations of the highly pixilated CdZnTe detector for PET applications

We are investigating the feasibility of a high resolution positron emission tomography (PET) insert device based on the CdZnTe detector with 350 µm anode pixel pitch to be integrated into a conventional animal PET scanner to improve its image resolution. In this paper, we [...]

2019-10-25meta-author

X-ray Photon Counting Imaging System

PAM-128 is a test system based on CZT photon counting array detector. It integrates four multi-pixel photon counting module and a thermal control system. The energy it can test ranges from 20~160KeV. Its testing resolution is 1.5lp/mm. And it support multi-energy-region test. It can [...]

2019-04-24meta-author

FWHM and XRD report

FWHM and XRD report A test report is necessary to show the compliance between custom description and our final wafers data. We will test the wafer characerization by equipment before shipment, testing surface roughness by atomic force microscope, type by Roman spectra instrument, resistivity by [...]

2018-08-14meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.