LaAlO3 single crystal-2

LaAlO3 single crystal-2

PAM XIAMEN offers LaAlO3 single crystal.

LaAlO3 single crystal provides a good lattice match to many materials with perovskite structure. It is an excellent substrate for epitaxial growth of high Tc superconductors, magnetic and ferro-electric thin films. The dielectric properties of LaAlO3 crystal are well suitable for low loss microwave and dielectric resonance applications. We is the largest grower of LaAlO3 single crystals in the world, and can supply as-grown boules, as-cut blanks and epi-polished substrates up to 3″ diameter. The surface roughness of We LaAlO3 substrate is warranted less than 5A through in house AFM quality control.

Round <100> LaAlO3 Wafer

1″, 2″ , 3″ wafers

LaAlO3, (100) Orientation. 0.5″ x 0.5mm wafer 2SP
LaAlO3, (100) Orientation. 1″ x 0.5mm wafer 1 SP
LaAlO3, (100) Orientation. 1″” x 0.5mm wafer 2 SP”
LaAlO3,(100) Orientation. EPI polishing 2″ x 0.5mm wafer 1 SP
LaAlO3, (100) Orientation. EPI polishing 3″ x 0.5mm wafer 1 SP
LaAlO3,(100) Orientation. EPI polishing 2″ x 1.0 mm wafer 2SP
LaAlO3, (100) Orientation. EPI polishing 2″ x 0.5mm wafer 2 SP
LaAlO3 wafer dia 3”, thickness 1mm+-0.05mm, double side polished, Flatness <= 10µm

For more information, send us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com

2019-05-07

Share this post

Related Posts

Indium incorporation dynamics in N-polar InAlN thin films grown by plasma-assisted molecular beam epitaxy on freestanding GaN substrates

Highlights •N-polar InAlN thin films were grown on GaN substrates by molecular beam epitaxy. •Surface morphology transitioned from quasi-3D to step-flow at high temperature. •Indium saturation was observed for increasing indium flux at high temperature. •Increased aluminum flux helped increase indium incorporation efficiency. •N-polar InAlN films with 0.19 nm [...]

2016-01-04meta-author , ,
Analyses of Five Major LED Manufacturers Vertical Integration Strategies (Part 2)

  Analyses of Five Major LED Manufacturers Vertical Integration Strategies (Part 2) In part one of these series, LEDinside explored Philips, Osram and Cree’s vertical integration strategies. In the second part of this series we will take a closer look at major Chinese LED companies MLS and Elech-Tech [...]

2016-05-10meta-author
GaN epitaxial growth on 4 degree off-axis Si- and C-face 4H-SiC without buffer layers by tri-halide vapor-phase epitaxy with high-speed wafer rotation

The results of GaN epitaxial crystal growth on 4° off-axis Si- and C-face 4H-SiC without buffer layers by tri-halide vapor-phase epitaxy (THVPE) with high-speed wafer rotation and the properties of the obtained material are briefly described in this paper. GaN epitaxial layers were grown [...]

2019-10-18meta-author
YSZ crystal-1

PAM XIAMEN offers YSZ （Y2O3 stabilized ZrO2）single crystal wafer. YSZ crystal is grown by “cold crucible” method. It is very difficult to get a larger size YSZ crystal. PAM XIAMEN supplies YSZ crystal wafer up to 2″ diameter. YSZ Substrates (100) 1、Square YSZ (100) [...]

2019-05-21meta-author
(20-21) Plane Si-GaN Freestanding GaN Substrate

PAM-XIAMEN offers (20-21) Plane Si-GaN Freestanding GaN Substrate Item PAM-FS-GAN(20-21)-SI Dimension 5 x 10 mm2 or 5 x 20 mm2 Thickness 380+/-50um Orientation (20-21)/(20-2-1) plane off angle toward A-axis 0 ±0.5° (20-21)/(20-2-1) plane off angle toward C-axis -1 ±0.2° Conduction Type Semi-Insulating Resistivity (300K) > 106 Ω.cm TTV ≤ 10 µm BOW BOW ≤ 10 µm Surface Roughness: Front side: Ra<0.2nm, epi-ready; Back side: Fine Ground or polished. Dislocation Density ≤5 x 106 cm-2 Macro Defect Density 0 cm-2 Useable Area > 90% (edge exclusion) Package each in single wafer container, under nitrogen atmosphere, packed in class 100 clean room   For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com

2020-08-20meta-author
Single Crystal Quartz Wafers

PAM XIAMEN offers Single Crystal Quartz Wafers. All single crystal quartz should be grown from one special seed. And the different cut type will cause the different seed location. One type is inside the wafer names “with seed”, the other type is not inside the wafers, so [...]

2019-02-27meta-author