LD Bare Bar for 976nm@cavity 4mm

PAM XIAMEN offers LD Bare Bar for 976nm@cavity 4mm.

Brand: PAM-XIAMEN
Wavelength: 976nm
Filling Factor: 10%
Output Power: 35W
Cavity Length:4mm

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, range from the first generation Germanium wafer, second generation Gallium Arsenide with substrate growth and epitaxy on III-V silicon doped n-type semiconductor materials based on Ga, Al, In, As and P grown by MBE or MOCVD, to the third generation: Silicon carbide and Gallium Nitride for LED and power device application.

2019-05-09

Related Posts

PbTe single crystal substrate

PAM XIAMEN offers PbTe single crystal substrate.(Not sell it temporarily) Lead telluride (Phoebe) is a compound of lead and tellurium (PbTe); it is a narrow gap semiconductor. It occurs naturally as the mineral altaite. It is often alloyed with tin to make lead tin telluride, [...]

2019-05-14meta-author

M Plane Si-GaN Freestanding GaN Substrate

PAM-XIAMEN offers M Plane Si-GaN Freestanding GaN Substrate Item PAM-FS-GAN M-SI Dimension 5 x 10 mm2 or 5 x 20 mm2 Thickness 380+/-50um Orientation M plane (1-100) off angle toward A-axis 0 ±0.5° M plane (1-100) off angle toward C-axis -1 ±0.2° Conduction Type Semi-Insulating Resistivity (300K) >106 Ω·cm TTV ≤ 10 µm BOW BOW ≤ 10 µm Surface Roughness Front side: Ra<0.2nm, epi-ready; Back side: Fine Ground or polished. Dislocation Density ≤ 5 x 10 6cm-2 Macro Defect Density 0 cm-2 Useable Area > 90% (edge exclusion) Package each in single wafer container, under nitrogen atmosphere, packed in class 100 clean room For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com

2020-08-20meta-author

80+1mm FZ Si Ingot-2

PAM XIAMEN offers 80+1mm FZ Si Ingot-2 FZ Si Ingot Diameter 80+1mm, N-type, <111>±2° Resistivity 1000-3000Ωcm Oxygen/Carbon Content 10Е16см-3 The silicon content not less than 99.999999% Length 150-480mm MCC lifetime>1000μs The dislocation density not, Swirl not For more information, send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

2020-03-18meta-author

Silver(Ag) on Si wafer

PAM XIAMEN offers Silver(Ag) on Si wafer . Silver Film on Silicom Wafer ,Ag: 0.2 microns / ,Si(100) P-type R:1-20 ohm.cm Silver Metallic Film Film Deposition by DC Sputtering Silver Thickness: 0.2 microns Film Resistivity: N/A Film Crystallinity: N/A Roughness, RMS: 4.87 nm and < [...]

2019-04-29meta-author

YAG Crystals-2

PAM XIAMEN offers YAG Er Doped Yttrium Aluminium Garnet Laser Crystal. PAM XIAMEN can supply a wide range of Er:YAG, Er doped Yttrium aluminium garnet single crystals and epi-ready crystal substrates to meet customer’s specific requirements. Specifications: Crystal structure: cubic Lattice parameters: 12.01 Å Orientations available: <111> or <100> crystalline within 5° Melt [...]

2019-03-15meta-author

2″ Silicon Wafer-3

PAM XIAMEN offers 2″ Silicon Wafer. Material Orient. Diam. Thck (μm) Surf. Resistivity Ωcm Comment Intrinsic Si:- [100-4.0°] ±0.5° 2″ 400 P/E FZ >20,000 SEMI Prime, TTV<5μm Intrinsic Si:- [100] 2″ 400 P/E FZ >20,000 SEMI Prime, TTV<5μm Intrinsic Si:- [100] 2″ 200 P/P FZ >10,000 SEMI Prime Intrinsic Si:- [100] 2″ 350 P/P FZ >10,000 SEMI Test, Wafers with edge chips Intrinsic Si:- [100] 2″ 500 ±10 P/E FZ >10,000 SEMI Prime Intrinsic Si:- [100] 2″ 500 ±10 P/E FZ >10,000 SEMI Prime Intrinsic Si:- [100] 2″ 500 ±10 P/E FZ >10,000 SEMI Prime Intrinsic Si:- [100] 2″ 300 P/E FZ 5,000-10,000 SEMI Prime Intrinsic Si:- [100] 2″ 300 P/E FZ 5,000-10,000 SEMI Prime, in hard cassettes of 2 & 5 wafers Intrinsic Si:- [111] ±0.5° 2″ 330 P/P FZ >20,000 SEMI Intrinsic Si:- [111] ±0.5° 2″ 330 P/P FZ >20,000 SEMI Intrinsic Si:- [111] [...]

2019-03-07meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.