LiF crystal

PAM XIAMEN offers LiF crystal.

LiF (100) 10x10x1.0mm, 1SP

LiF (100) 10x10x1.0mm, 2SP

LiF (111) 10x10x1.0mm, 1SP

LiF (111) 10x10x1.0mm, 2SP

LiF (110) 10x10x1.0mm, 1SP

We also can offer LiF polycrystal (PAM161011-LIF):

Diameter=15mm

Length=25mm

Purity>99.99%

For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com.

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, range from the first generation Germanium wafer, second generation Gallium Arsenide with substrate growth and epitaxy on III-V silicon doped n-type semiconductor materials based on Ga, Al, In, As and P grown by MBE or MOCVD, to the third generation: Silicon carbide and Gallium Nitride for LED and power device application.

2019-05-08

Related Posts

Optical interference effect of a thick absorbing LT-GaAs layer on a Bragg reflector

Optical interference effect of a thick absorbing LT-GaAs layer on a Bragg reflector Near-infrared reflectance spectra of 5 μm thick low-temperature (LT) GaAs films on GaAs/AlAs Bragg reflectors (BRs) have been studied by model calculations as a function of the linear absorption coefficient of the films αf. [...]

2013-12-10meta-author LT-GaAs layer

How to Detect Residual Stress in SiC Wafers?

Silicon carbide (SiC) wafer material supplied by PAM-XIAMEN, like SiC substrate (link: https://www.powerwaywafer.com/sic-wafer/sic-wafer-substrate.html) is widely used in aerospace, radar communication, automotive industry and semiconductor industry due to its excellent properties such as high thermal conductivity, high strength, high temperature resistance and radiation resistance. However, [...]

2022-07-15meta-author

Ge single crystal(Prime grade)-8

PAM XIAMEN offers 4″ Diameter Wafer. 4″ Diameter Wafer Ge N-type 4” ,undoped Ge Wafer (111) 4″ dia x 0.5 mm, 1SP, N type ( un- doped) Ge Wafer (100) . Undoped, 4″ dia x 0.5 mm, 1SP Ge Wafer (100) . Undoped, 4″ [...]

2019-04-25meta-author

4″ CZ Prime Silicon Wafer Thickness 1500±25μm

PAM XIAMEN offers 4″Prime Silicon Wafer with double side lapping 4″ CZ crystal Si wafer N type doped P Orientation<111> Resistivity 12-15Ωcm Thickness 205-220μm Prime Flat32.5±2.5mm no need for DSP, just double side lapping For more information, please visit our website: https://www.powerwaywafer.com, send us email [...]

2019-07-02meta-author

Boron Nitride Film on Silicon Wafer

PAM XIAMEN offers Boron Nitride Film on Silicon Wafer. Boron Nitride Film on Silicon Wafer , 24 nm / 4″ — BN-Si-100-24nm Boron nitride is a chemical compound with chemical formula BN, consisting of equal numbers of boron and nitrogen atoms. BN is isoelectronic [...]

2019-04-26meta-author

(110) Silicon Wafers

PAM XIAMEN offers (110) Silicon Substrates. If you don’t see what you need then please email at sales@powerwaywafer.com. Diam (mm) Material Dopant Orient. Thck (μm) Surf. Resistivity Ωcm Comment 6″ p–type Si:B [110] ±0.5° 390 ±10 C/C >10 Prime, 2Flats, Empak cst 6″ p–type Si:B [110] ±0.5° 500 P/E FZ >10,000 Prime, 2Flats, Empak cst, TTV<5μm 6″ p–type Si:B [110] ±0.5° 200 P/P FZ 1–2 Prime, 2Flats, Empak cst 6″ p–type Si:B [110] ±0.5° 200 P/P FZ 1–2 SEMI Prime, 2Flats, Empak cst 6″ p–type Si:B [110] [...]

2019-02-22meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.