Magnesium ( Mg ) Single Crystal Substrate

PAM XIAMEN offers Magnesium ( Mg ) Single Crystal Substrate.

Magnesium ( Mg ) Single Crystal Substrate , <0001> orn. 5x5x0.9-1.0mm, 1SP

Magnesium ( Mg) Polycrystaline Substrate , 10x10x2.0mm, as Cut

Magnesium ( Mg) Single Crystal Substrate , <0001> orn. 10x10x0.85-1.0mm, 1SP

Magnesium ( Mg ) Foil: 100mm Width x 0.1 mm thick x 1000 mm Length

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at [email protected] and [email protected]

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, range from the first generation Germanium wafer, second generation Gallium Arsenide with substrate growth and epitaxy on III-V silicon doped n-type semiconductor materials based on Ga, Al, In, As and P grown by MBE or MOCVD, to the third generation: Silicon carbide and Gallium Nitride for LED and power device application.

2019-05-10

Related Posts

Single Crystal KTaNbO3 (KTN) – Can’t Offer Temporarily

Single crystal KTaNbO3 is available from PAM-XIAMEN. Potassium tantalum niobate (KTa1-xNbxO3; KTN for short) crystal is a kind of multifunctional crystal material with high electro-optical coefficient, good piezoelectric and pyroelectric effects. It has significant electro-optical and photorefractive effects. The KTaNbO3 crystal is generally grown [...]

2019-05-07meta-author

LIALO2 LITHIUM ALUMINATE CRYSTALS SUBSTRATES

PAM XIAMEN offers LiAlO2 Lithium Aluminate Crystal Substrates. Main Parameters Crystal structure M4 Unit cell constant a=5.17 A c=6.26 A Melt point（℃） 1900 Density 2.62（g/cm3） Hardness 7.5（mohs） Size 10×3，10×5，10×10，15×15，20×15，20×20， Ф15,Ф20，Ф1″，Ф2″, Ф2.6″ Thickness 0.5mm, 1.0mm Polishing Single or double side polished Crystal [...]

2019-03-13meta-author

Determining the optimal probing lot size for the wafer probe operation in semiconductor manufacturing

In this study, we reformulated the problem of wafer probe operation in semiconductor manufacturing to consider a probe machine (PM) which has a discrete Weibull shift distribution with a nondecreasing failure rate. To maintain the imperfect PM during the probing of a lot of [...]

2014-09-30meta-author semico, semiconductor wafer process, semiconductor wafer sizes

Silicon Ingots-4

PAM XIAMEN offers Silicon Ingots. Material Description FZ 2″Ø×38mm ingot, p-type Si:B[100]±2º, Ro:~2,900Ohmcm FZ 2″Ø×(392+342+304+263+250+175)mm ingots, p-type Si:B[111]±2º, (2,000-5,000)Ohmcm FZ 2″Ø×(100+87+86+85+85+84)mm ingots, n-type Si:P[111], (2,000-4,000) {2,166-3,835} Ohmcm FZ 2″Ø×26mm ground ingot, n-type Si:P[111]±2º, (5,000-13,000)Ohmcm, MCC Lifetime>1,100μs FZ 2″Ø ingot Intrinsic Si:-[100], Ro: >20,000 Ohmcm, Ground, (6 ingots: 154mm, 117mm, 143mm, 100mm, 101mm, 100mm) FZ 2″Ø×(160+98)mm ingots, Intrinsic Si:-[111]±2º, Ro>12,000 [...]

2019-03-08meta-author

Investigation of the limitations of the highly pixilated CdZnTe detector for PET applications

We are investigating the feasibility of a high resolution positron emission tomography (PET) insert device based on the CdZnTe detector with 350 µm anode pixel pitch to be integrated into a conventional animal PET scanner to improve its image resolution. In this paper, we [...]

2019-10-25meta-author

4H Semi-insulating SiC

PAM-XIAMEN offers 4H semi-insulating SiC wafer with vanadium doped or undoped high-purity, semi-insulating, size from 2” to 6”. The transmission rate of 4H semi-insulating silicon carbide with thickness of 353 um, double sides polished is shown as the figure: Transmission Rate of 4H Semi-insulating SiC Wafer We also [...]

2018-08-07meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.