Nd2Ga5O12 single crystal

PAM XIAMEN offers Nd2Ga5O12 single crystal.

PAM XIAMEN is developing a series of doped GGG single crystal for nest generation Magneto-optical device.

Composition (Cubic)	GGG Gd3Ga5O12	YSGG Y3Sc2Ga3O5	S-GGG（CaMgZr：GGG） Gd2.6Ca0.4Ga4.1Mg0.25Zr0.65O12	NGG Nd3Ga5O12	GYSGG Gd0.63Y2.37Sc2Ga3O12	GSGG Gd3Sc2Ga3O12
Lattice constant	12.376 Å	12.426 Å ,	12.480 Å	12.505Å	12.507 Å ,	12.554 Å ,
Diffraction（2θ）	51º7′	50º44′	50º43′	50º41′	50º40′	50º22′
Melting Point	~1800 oC	~1877℃	~1730 oC	~1550 oC	~1730 oC	~1730 oC

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at [email protected] and [email protected]

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

You can get our free technology service from enquiry to after service based on our 25+ experiences in semiconductor line.

2019-05-14

Related Posts

4″ CZ Prime Silicon Wafer

PAM XIAMEN offers 4″ CZ Prime Silicon Wafer. 4″ epi CZ P-type (100)±0.5° Thickness 525±15μm Resistivity 0.015±0.005Ωcm For more information, please visit our website: https://www.powerwaywafer.com, send us email at [email protected] and [email protected] Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a [...]

2019-06-28meta-author

4″FZ Prime Silicon Wafer-2

PAM XIAMEN offers 4″FZ Prime Silicon Wafer. Silicon wafers, per SEMI Prime, P/E 4″Ø×525±25μm, FZ Intrinsic undoped Si:-[111]±0.5°, Ro > 10,000 Ohmcm, TTV<5μm, Bow<20μm, Warp<30μm, One-side-Epi-Ready-polished, back-side etched, SEMI Flats, Sealed in Empak or equivalent cassette, MCC Lifetime>1,000μs. For more information, please visit our [...]

2019-07-04meta-author

InGaAs SWIR Detector

SWIR (short wave infrared) detector is widely used in aerospace remote sensing, low-light night vision, medical diagnosis, agricultural industry, security monitoring and other fields. The short-wave infrared InGaAs detector has the characteristics of high detection rate, high uniformity and high stability, and is one [...]

2022-04-02meta-author

Bi2Se3

PAM XIAMEN offers high-quality Bi2Se3. Molar mass: 654.8 g/mol Appearance: Dull grey Lattice Parameters: a=4.14 A, c=28.7 A Density: 6.82 g/cm^3 Melting point:710 °C (1,310 °F; 983 K) Structure: Hexagonal Displaying products 1 – 1 of 1 results Bi2Se3 Single crystal (0001) orn. 10x10x1.0 mm, both sides polished [...]

2019-04-17meta-author

FZ NTD Silicon Wafer with a Uniform Doping Concentration

PAM-XIAMEN can offer FZ neutron transmutation doping (NTD) silicon wafer with a uniform doping concentration and uniform radial resistivity distribution. At present, silicon material is still the most important basic material in the electronic information industry. More than 95% of semiconductor devices and more [...]

2021-06-24meta-author

VCSEL Laser Epi Wafer

GaAs quantum well VCSEL wafer with an emission wavelength of 808nm is available for optical pumping. VCSEL (Vertical Cavity Surface Emitting Laser) is developed on the basis of gallium arsenide semiconductor materials. The VCSEL fabrication of devices has the advantages of small size, small [...]

2021-07-19meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.