Polyelectrolyte Multilayer Modified Silicon Substrate

  • Home
  • News
  • Polyelectrolyte Multilayer Modified Silicon Substrate

Polyelectrolyte Multilayer Modified Silicon Substrate

PAM XIAMEN offers Polyelectrolyte Multilayer Modified Silicon Substrate
A client of our recently requested a substrate that would help them with their research experiement.

“My experiment is to synthesize the novel magnesium biomaterials on the polyelectrolyte multilayer modified silicon wafer. The wafer would be similar with the attached paper 2002. And my designed novel materials is also as the attached.”

100mm P/B <100> 1-10 ohm-cm 500um SSP Prime Grade with 100nm of thermal oxide

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Our goal is to meet all of your requirements, no matter how small orders and how difficult questions they may be,
to maintain sustained and profitable growth for every customer through our qualified products and satisfying service.

2019-02-26

Share this post

Related Posts

3″ Silicon Wafer-8

PAM XIAMEN offers 3″ Silicon Wafer. Material Orient. Diam. Thck (μm) Surf. Resistivity Ωcm Comment n-type Si:P [111-5° towards[110]] ±0.25° 3″ 1000 P/E >5 SEMI Prime, in hard cassettes of 6, 6 & 7 wafers n-type Si:P [111-5° towards[110]] ±0.25° 3″ 1300 P/E >5 SEMI Prime, hard cst n-type Si:P [111-0.5° towards[110]] ±0.25° 3″ 1400 E/E >5 SEMI, LaserMark, in opened hard cast n-type Si:P [111-2.5°] ±0.5° 3″ 380 P/E 1-3 SEMI Prime n-type Si:P [111] ±0.5° 3″ 380 P/E 1-10 SEMI Primet n-type Si:P [111-3.0°] ±1° 3″ 381 P/E 1-20 {1.7-5.7} SEMI Test n-type Si:P [111] ±0.5° 3″ 570 P/P 1-10 SEMI Primet n-type Si:Sb [111] ±0.5° 3″ 380 P/E 0.019-0.026 SEMI Prime, in Empak cassettes [...]

2019-03-06meta-author
Towards the cost effective epitaxy of hillocks free CdZnTe film on (001)GaAs by close-spaced sublimation

Towards the cost effective epitaxy of hillocks free CdZnTe film on (001)GaAs by close-spaced sublimation   Cost-effective epitaxy of hillocks free CdZnTe films on (001)GaAs was explored with close-spaced sublimation (CSS) technique. The orientation and film quality were studied with scanning electron microscopy (SEM), X-ray diffraction θ–2θ and Φ scans [...]

2013-11-20meta-author , , ,
1654nm laser diode wafers

PAM XIAMEN offers 1654nm laser diode wafers. Available Center Wavelengths: 1640nm – 1670nm Wavelength Tolerance: +/- 1nm CW Output Power (typical): 8mW (out of fiber) SMSR (typical): >40 dB Optical Linewidth: < 1.5 MHz Temperature Tuning Coefficient (typical): 0.1 nm/°C Current Tuning Coefficient (typical): 10 pm/mA Slope Efficiency (typical): 0.10 mW/mA For more [...]

2019-03-13meta-author
3″ Silicon Wafer-9

PAM XIAMEN offers 3″ Silicon Wafer. Material Orient. Diam. Thck (μm) Surf. Resistivity Ωcm Comment Si 3″ P/P SEMI TEST (Unsealed)t Si 3″ P/P SEMI TEST (Unsealed)t n-type Si:P [100] ±0.1° 3″ 380 P/E FZ >5,000 SEMI Test, Bad Lasermark on back. To use with chuck light polish needed on back n-type Si:P [100] 3″ 381 P/P FZ 100-500 SEMI Prime n-type Si:P [111] 3″ 300 P/E FZ 61-95 Prime, NO Flatst Intrinsic Si:- [100] 3″ 300 P/P FZ >20,000 Prime, NO Flats, Individual cst Intrinsic Si:- [111] ±0.5° 3″ 1975 P/P FZ >20,000 Prime, NO Flats, Individual cst p-type Si:B [110] 3″ 380 P/E 1-10 1 F @ <1,-1,0> p-type Si:B [100] 3″ 380 P/P 80-170 SEMI Prime p-type Si:B [100] 3″ 300 P/P 30-35 SEMI Prime p-type Si:B [100] 3″ 200 P/E 10-20 SEMI [...]

2019-03-06meta-author
X-ray diffraction analysis of LT-GaAs multilayer structures

X-ray diffraction analysis of LT-GaAs multilayer structures Multilayer structures of low-temperature-grown GaAs(LT-GaAs) into which ultra-thin layers containing excess As are periodically introduced are grown by molecular beam epitaxy. The concentration of excess As in the ultra-thin layers is determined by the analysis of the intensity [...]

2013-11-25meta-author ,
4″ LiNbO3 thin film on Silicon Wafer

Lithium niobate (LiNbO3) wafer has excellent electro-optic, nonlinear and piezoelectric properties. With the advanced micro- and nanofabrication techniques, integrated photonics devices based on lithium niobate on insulator (LNOI) thin films have been extensively studied. In the future, high-performance LiNbO3 thin film prepared will support [...]

2020-03-10meta-author