Материал InGaAsP, эпитаксиально выращенный на подложке InP, является важным материалом для изготовления оптоэлектронных и СВЧ-приборов. Длина волны излучения лазерной структуры InGaAsP/InP составляет 1,0–1,7 мкм, охватывая два окна с низкими потерями 1,3 мкм и 1,55 мкм для связи по кварцевому волокну. Поэтому InGaAsP широко используется в...
Q: Please let us know if you could supply below wafer, qty 25/50/300. Gallium Arsenide wafers, P/P 150.00±0.25 mm) 6"Ø×650±25µm, VGF SI undoped GaAs:-[100-2.0°towards[110]]±0.5°, u > 4,000cm²/Vs, Both-sides-polished, 1 Flat 57.5±2.5 mm @ 110±°1, TTV<7µm, BOW<4µm, Warp<10µm, TIR<6µm, Certificate: obligatory, Sealed under nitrogen in single wafer cassette A: Yes, will check the delivery time and come back to...
PAM-XIAMEN can supply GaAs wafer with EPD less than 5000/cm2. Q: Could you please advise guaranteed EPD for below substrate and epi? Gallium Arsenide wafers, P/E 2"Ø×380±25µm, LEC SI c doped GaAs:-[100]±0.5°, n-type Ro=(0.8E8-0.9E8)Ohmcm, One-side-polished, back-side matte etched, 2 Flats, LT-GaAs EPI: 1-2µm, Resistivity >1E7 Ohm-cm, Carrier lifetime <1ps, Sealed under nitrogen...
Q: We would like to ask for below. (001) +/- 0.5o Orientation Semi Insulating, C doped Resistivity ≤ 1 – 10 x 108 Ohm-cm3 EPD ≤ 5000 cm-2 1 Side Polished (Ra < 10Å), EPI Ready, Back Side Etched US Semi Standard Flats, No Laser Markings Individual spider style wafer...
Q:We request for the following items 1. Silicon (Si) single crystal wafers, polished on one side N-type, orientation<100>, Resistivity 5E-3 ohm.cm, Thickness: 0.1 to 0.5 mm 2. Silicon (Si) single crystal wafers, polished on one side P-type, orientation <100>, Resistivity 5E-3 ohm.cm, Thickness: 0.1 to 0.5 mm A:Yes, we could supply based on...
Q: SiC wafer reclaim, can you gurantee surface roughness<=0.3nm? A: Sure, no problem
Q:I was wondering if you carried any semi-insulating(not doped)SiC or single crystal HPSI SiC? A: For our semi-insulating SiC substrate, it is V doped, we can not offer High Purity semi-insulating SiC, however we can offer undoped SiC if your quantity is good.
Q:I want to know the dopant concentration of SiC substrate that you normally provide ? What is the maximum Nitrogen dopant concentration that you can provide? I am looking for heavily nitrogen doped SiC wafers? A: Our Nitrogen dopant concentration is 1E18/cm3-1E19/cm3, which belongs to heavy dopant.
Q:Can you offer SiC mono crystal material with high Thermal Conductivity > 490 W/mK, wafers with thickness: 300-1000um for semiconductor devices heat sinks manufacturing? A: Thermal Conductivity> 490 W/mK is theory value of SiC mono, however we tested some wafers, the thermal conductivity is below 450W/mK, which are lower the theory...
Q: Can you offer some SiC(0001) wafers with low but intentionnal misorientation in the 1° to 2° range? A: We can offer misorientation in low degree, no problem.