worldwide-semiconductort

Sales of semiconductors: present and next future of the global market

semiconductor

“Softening demand and lingering macroeconomic challenges continued to limit global semiconductor sales in November. Despite these headwinds, the industry may narrowly surpass total annual sales from 2014 and is projected to post modest sales increases in 2016 and beyond”. With these words John Neuffer, president and CEO of SIA(Semiconductor Industry Association), has commented the global sales of semiconductors in November 2015 and the forecast for the next future. According to SIA, worldwide sales reached $28.9 billion for the month of November 2015, 0.3 percent lower than the previous month’s total of $29.0 billion and 3 percent down from the November 2014 total of $29.8 billion. Regionally, month-to-month sales increased in China (1%), Europe (1%) and the Americas (0.3%), but decreased in Japan (-0.6%), and Asia Pacific/All Other (-2.4%). Compared to November 2014, sales were up in China (5.3%), but down in Asia Pacific/All Other (-4.1%), the Americas (-7.1%), Europe (-8%), and Japan (-8.6%).

SOURCE:.householdappliancesworld For more information, please visit our website:

www.powerwaywafer.com, send us email at [email protected] .

2016-07-12

Related Posts

Dummy Grade Indium Phosphide Wafer

Dummy grade single crystal indium phosphide wafer is available with doping S grown by VGF. The electron concentration of the N-type indium phosphide wafer reaches 1018cm-3, and the indium phosphide resistivity is very low, generally 10-2~10-3Ω·cm. It is mostly used in high-speed optoelectronic devices, such as LD, LED, [...]

2021-08-06meta-author

LBIC investigation of impurity-dislocation interaction in FZ silicon wafers

In the present work, dislocation arrays are investigated in float zone (FZ) grown silicon wafers by the light beam induced current (LBIC) mapping technique at different wavelengths and by deep level transient spectroscopy (DLTS). The LBIC technique appears to be able to recognize and [...]

2015-06-21meta-author silicon wafer resistance, silicon wafer thickn, silicon wafers

Gallium Nitride Is Non-Toxic, Biocompatible; Holds Promise for Implants, Research Finds

Gallium Nitride Is Non-Toxic, Biocompatible; Holds Promise for Implants, Research Finds Gallium Nitride(GaN) is currently used in a host of technologies, from LED lighting to optic sensors, but it is not in widespread use in biomedical implants. However, the new findings from NC State and [...]

2012-06-20meta-author

Solar Silicon Wafers

Solar Silicon Wafers PAM XIAMEN offers Solar Silicon Wafers. Limiting Efficiency It has been well established that the limiting efficiency of single crystals falls at about 29% [Swanson] this limit was established in the seminal work by Tiedje. In figure 1 we can see this limiting efficiency [...]

2019-02-14meta-author

3″Prime Silicon Wafer Thickness 375um-2

PAM XIAMEN offers 3″Prime Silicon Wafer Thickness 375um. 3″ Si wafer Diameter: 76.2 +/- 0,1 mm Thickness: 375±25μm Orientation: <111> Dopant: p-type/Boron Resistivity<0.005Ωcm Front side polished Back side: frosted SEMI standard For more information, please visit our website: https://www.powerwaywafer.com, send us email at [email protected] [...]

2019-07-04meta-author

Effects of post-growth annealing on the performance of CdZnTe:In radiation detectors with different thickness

Effects of post-growth annealing on the performance of CdZnTe:In radiation detectors with different thickness An effective post-growth annealing method was used to improve the performance of CdZnTe:In (CZT:In) radiation detectors. The results indicated that Te inclusions in CZT:In crystals with different thickness were eliminated completely [...]

2013-11-26meta-author CdZnTe:In, IR transmittance, Resistivity, Te inclusions

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.