Silver Conductive Film

PAM XIAMEN offers Silver Conductive Film.

Planarized Silver Nanowire Film（230mm W x 1 M L x 125 microns, 12 ohm/sq ）on Heat Stabilized PET for thin film applications – Ag-PET-12K-1

Planarized silver nanowire film on heat stabilized PET for thin film applications
Width 9in./230mm
Thickness: 125 micron / 5 mil
Conductivity: 12 ohm/sq
Transparency: 88%
Haze: <6%
Surface: Ra<2nm typical
1 meter per package ( 5 meter package is available upon request

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

You can get our free technology service from enquiry to after service based on our 25+ experiences in semiconductor line.

2019-04-26

Related Posts

InAs Heteroepitaxy

InAs heteroepitaxial layer grown on GaAs (100) substrate is very meaningful in the field of optoelectronics, especially in the field of infrared detectors and lasers. InAs has some potential characteristics, such as high electron mobility and narrow energy gap, and many metals can be [...]

2023-02-10meta-author

50.8mm (2 Inch) Silicon Wafers-5

PAM XIAMEN offers 50.8mm Si wafers. Please send us email at sales@powerwaywafer.com if you need other specs and quantity. Item Material Orient. Diam (mm) Thck (μm) Surf. Resistivity Ωcm Comment PAM2179 p-type Si:B [100] 2″ 300 P/E 1–10 SEMI Prime, 2Flats, hard cst PAM2180 p-type Si:Ga [100] 2″ 350 P/P 1–5 SEMI Prime, 2Flats, hard cst PAM2181 p-type Si:B [100] 2″ 500 P/E 1–2 SEMI Prime, 2Flats, hard cst PAM2182 p-type Si:B [100] 2″ 900 P/E/P 1–10 SEMI Prime, 2Flats, hard cst PAM2183 p-type Si:B [100] 2″ 2000 P/P 1–10 SEMI Prime, 2Flats, Individual cst PAM2184 p-type Si:B [100] 2″ 2000 P/E 1–10 SEMI Prime, [...]

2019-02-18meta-author

Lithium Niobate

Lithium niobate (LiNbO3) is a compound of niobium, lithium, and oxygen. Its single crystals are an important material for optical waveguides, mobile phones, piezoelectric sensors, optical modulators and various other linear and non-linear optical applications.Single crystals of lithium niobate can be grown using the [...]

2019-02-28meta-author

Photomask Middium and Small Size

PAM XIAMEN offers Middium and Small Size Photomask. Chromium Plate Accuracy (Standard Size:6inch Quartz) Accuracy/Grade Max Accuracy High-precision Medium accuracy General accuracy Min.Line/Space Width 0.75μm/0.75μm 3μm/3μm 5μm/5μm 10μm/10μm CD Control ±0.1μm ±0.3μm ±0.5μm ±1.0μm Total Pitch Accuracy ±0.25μm ±0.5μm ±0.75μm ±1.0μm Registration Accuracy ±0.25μm ±0.5μm ±0.75μm ±1.0μm Overlay Accuracy ±0.25μm ±0.5μm ±0.75μm ±1.0μm Orthogonality ±0.5μrad ±0.75μrad ±1.0μrad ±2.0μrad Chrome Plate Material (Photomask Blank Plate) Material Soda Lime Glass、Quartz Max. Size 3006,4009,5009,6012,6025,7012,9012,12″x12″,14″x14″ Normal Size 1.5±0.2mm,2.3±0.2mm ,3.0±0.2mm ,4.8±0.2mm Thickness 6.35±0.2mm (QZ) Film Type Low Reflectance Chrome Optical Density(λ=450nm) Between Plates3.0±0.3 In Plate±0.3 Reflectivity(λ=436nm) Between Plates10±5% In Plate±2% Main application areas: 1. IC Bumping, [...]

2019-07-04meta-author

Graded InGaN Enlightens Us On Molecular Interactions

A gradient is a material that has a specific molecule on its surface, with the concentration of the molecule sloping from a high concentration on one end to a low concentration at the other end. The gradient is used not only to determine whether [...]

2013-09-02meta-author InGaN substrate

100mm N Type GaN Substrate

PAM-XIAMEN offers larger size of N type FS GaN substrate including Si-doped and undoped one as follows: 1. N Type GaN Substrate Datasheet 1.1 4″(100mm) Undoped Free-standing GaN Substrate Item PAM-FS-GaN100-U Conduction Type Undoped Size 4″(100)+/-1mm Thickness 350-450um Orientation C-axis(0001)+/-0.5° Primary Flat Location (1-100)+/-0.5° Primary Flat Length – Secondary Flat Location (11-20)+/-3° Secondary Flat Length – Resistivity(300K) <0.5Ω·cm Dislocation Density <5×10^6cm-2 FWHM – TTV <=35um BOW <=50um Surface Finish Front Surface:Ra<0.2nm.Epi-ready polished Back Surface:1.Fine ground 2.Rough grinded Usable Area ≥ 90 [...]

2020-03-25meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.