Soda Lime Glass Window Applications

PAM XIAMEN offers Soda Lime Glass Window.
Please send us email at [email protected] if you need other specs and quantity.

Applications where too much heat build up is a problem Hot mirrors to reflect Infrared and Transmitting Visible Light Cold mirrors for trasmitting Infrared (IR) and Reflecing Visible Light.

Mirrors Printed Circuit Boards Microslides Electronic Applications

Item	Dia	Thick	Polish
PAM3350	25mm x 25mm	1.1mm	DSP
PAM3351	50mm x 50mm	0.7mm	DSP
PAM3352	50.8mm	500um	DSP
PAM3353	100mm	550um	DSP
PAM3354	300mm	500um	DSP

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at [email protected] and [email protected]

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China.PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices.PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Before 1990, we are stated owned condensed matter physics research center. In 1990, center launched Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN), now it is a leading manufacturer of compound semiconductor material in China.

2019-02-27

Related Posts

Single-emitter LD Chip 755nm @8W

PAM XIAMEN offers Single-emitter LD Chip 755nm @8W. Brand: PAM-XIAMEN Wavelength: 755nm Stripe width: 350um Output Power: 8W Cavity Length:2.5mm For more information, please visit our website: https://www.powerwaywafer.com, send us email at [email protected] and [email protected] Found in 1990, Xiamen Powerway Advanced Material Co., Ltd [...]

2019-05-09meta-author

4″ Silicon Wafer-15

PAM XIAMEN offers 4″ Silicon Wafer. Material Orient. Diam. Thck (μm) Surf. Resistivity Ωcm Comment Intrinsic Si:- [211] ±0.1° 4″ 275 P/P FZ >3,000 SEMI Prime, TTV<2μm Intrinsic Si:- [111] ±0.5° 4″ 500 P/P FZ >25,000 SEMI Prime p-type Si:B [110] ±0.5° 4″ 525 P/E 4-6 SEMI Prime, 2 Flats at [111], Secondary 70.5° CW from PF p-type Si:B [110] 4″ 525 P/E 2-10 PF<111> SF 109.5° p-type Si:B [100] 4″ 300 P/E 800-5,400 SEMI Prime p-type Si:B [100] 4″ 500 P/P 10-20 SEMI Prime p-type Si:B [100] 4″ 3000 P/E/P 10-15 SEMI Prime, Individual cst p-type Si:B [100-6°] 4″ 250 P/E 8-12 SEMI Prime p-type Si:B [100] 4″ 275 P/P 7-14 SEMI Prime, TTV<5μm p-type Si:B [100] 4″ 300 P/E 7-14 SEMI Prime, TTV<5μm p-type [...]

2019-03-05meta-author

The effect of GaN and ain buffer layers on GaN film properties grown on both C-plane and A-plane sapphire

The effect of GaN and ain buffer layers on GaN film properties grown on both C-plane and A-plane sapphire This paper presents a comparative study of the properties of GaN grown by organometallic vapor phase epitaxy, using both a GaN and A1N buffer layer, as [...]

2013-04-03meta-author

Unusual defects, generated by wafer sawing: Diagnosis, mechanisms and how to distinguish from related failures

Unusual defects, generated by wafer sawing: Diagnosis, mechanisms and how to distinguish from related failures In the wafer sawing process, unusual failures were observed and their root causes have been investigated. Besides classical and well-known failures, the following failure mechanisms were found. Surface-ESD (ESDFOS), caused [...]

2013-10-25meta-author wafer sawing

Bonding characteristics of 3C-SiC wafers with hydrofluoric acid for high-temperature MEMS applications

This paper describes the bonding characteristics of 3C-SiC wafers using plasma enhanced chemical vapor deposition (PECVD) oxide and hydrofluoric acid (HF) treatment for SiC-on-insulator (SiCOI) structures and high-temperature microelectromechanical system (MEMS) applications. In this work, insulator layers were formed on a heteroepitaxial 3C-SiC film [...]

2015-08-19meta-author

Sony and Apple’s Micro-LED Display Market Strategy

Sony and Apple’s Micro-LED Display Market Strategy Sony and Apple are the key to promoting micro-LED displays on the market, but the two have diverged in display developments. The Japanese company is making large micro-LED displays, and Apple small displays, but why have both chosen micro-LEDs? [...]

2016-08-22meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.