SrTiO3 single crystal-1

PAM XIAMEN offers SrTiO3 single crystal.

SrTiO3 single crystal provides a good lattice match to most of  materials with Perovskite structure.  It is an excellent substrate for epitaxial film of HTS and many oxide. It has been used widely for special optical windows and as high quality sputtering target.  PAM XIAMEN has the full production line to manufacture first the high purity SrTiO3 powder, then the single crystal boules and finally the epi-polished substrates in many sizes. This allows us to provide SrTiO3 single crystal products with the highest quality and the lowest price to our customers the world over.

(100) SrTiO3

1、Small Square: 5×5 mm

SrTiO3 (100) 5x5x0.1mm , 1 SP”
SrTiO3 (100) 5x5x0.25 mm, 2 SP
SrTiO3 (100) 5x5x0.5 mm , 1 SP
SrTiO3 (111) 5x5x0.5 mm, 1 SP( PAM210310-STR)
SrTiO3 (100) 5x5x0.5 mm, 2 SP
SrTiO3 (100) 5x5x1.0 mm, 1 SP
SrTiO3 (100) 5x5x1.0 mm, 2 SP

2、Retangular: 10×5 mm

SrTiO3 (100) 10x5x0.5mm, 1sp
SrTiO3 (100) 10x5x0.5mm, 2sp
SrTiO3 (100) 10x5x1.0 mm Epi polished wafer 1 SP

3、Square: 10x10mm

SrTiO3 (100) 10x10x0.5mm, 1sp, (Crystal made in Japan)
SrTiO3 (100) 10x10x0.5 mm Epi polished wafer 1 SP
SrTiO3 Substrate with Step Surface & Ti terminated (100) 10x10x0.5mm, 1 SP
SrTiO3 (100) 10x10x0.5 mm Epi polished wafer 2SP
SrTiO3 (100) 10x10x1.0 mm Epi polished wafer 1 SP
SrTiO3 (100) 10x10x1.0 mm Epi polished wafer 2 SP
SrTiO3 (100) 10x10x0.1mm, 1SP
SrTiO3 (100) 10x10x0.1mm, 2SP

4、Inch Size: 0.25″square, 0.5″ square and 1″ Round

SrTiO3 (100) 0.25″x0.25″x0.5 mm Epi polished wafer 1 SP
SrTiO3 (100) 0.25″x0.25″x0.5 mm Epi polished wafer 2 SP
SrTiO3 (100) 0.5″x0.5″x0.5 mm , 2 SP
SrTiO3 (100) 0.5″x0.5″x0.5 mm Epi polished wafer 1 SP
SrTiO3 (100) 0.5″x0.5″x1.0 mm Epi polished wafer 1 SP
SrTiO3 (100) 1″ dia. x0.5 mm Epi polished wafer 1 SP
SrTiO3 (100) 1″ dia. x0.5 mm Epi polished wafer 2 SP
SrTiO3 (100) 30mm dia. x0.5 mm 1SP
SrTiO3 (100) 30mm dia. x0.5 mm Epi polished wafer 2 SP
SrTiO3 Substrate with Ti terminated and Step Surface
SrTiO3 Substrate with Step Surface & Ti terminated (100) 10x10x0.5mm, 1 SP

5 FAQ:

Question:please couldyou confirm the process for making TiO2-termination on the SrTiO3 surface, is it with buffer acid or heat treatment?

Answer: Low concentration hydrofluoric acid corrosion, then deionized water cleaning, and then high temperature annealing

powerwaywafer

 

 

 

 

 

For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com

Share this post