PAM-XIAMEN is able to supply nitrogen (N) doped silicon wafers, specifications please refer to:
https://www.powerwaywafer.com/silicon-wafer.
The doping of nitrogen as an impurity into silicon crystals not only has a beneficial effect on the performance of silicon wafers, but also has an important impact on the physical [...]
2024-04-16meta-author
SiC wafers are available for power electronics, scientific or industrial applications, specifications as: https://www.powerwaywafer.com/sic-wafer/sic-wafer-substrate.html
SiC is a binary compound formed in a 1:1 ratio of Si and C elements, consisting of 50% silicon (Si) and 50% carbon (C). Its basic structural unit is the Si-C [...]
2024-03-21meta-author
PAM XIAMEN offers 6″ Silicon Wafer-5 as follows, while silicon wafer list includes, but not limited to the following.
150mm wafers
Orientation100,
SSP,
Flat Semi Std
Thickness 530+/-15um
Doping N/A (no requirement)
1um thermal oxide
For more polished wafer specification, please see below link:
https://www.powerwaywafer.com/silicon-wafer
For 6″ Silicon Wafer-5 please see below link:
link 1.6″ [...]
2019-11-26meta-author
PAM-XIAMEN, a leading SiC epitaxial wafer manufacturer, can offer 4H SiC epitaxial wafers for MOS fabrication, which refer to a single crystal film(epitaxial layer) with certain requirements and the same crystal growing on a silicon carbide substrate. The SiC epitaxial wafer market size is [...]
2021-05-17meta-author
PAM XIAMEN offers 50.8mm Si wafers.
Please send us email at sales@powerwaywafer.com if you need other specs and quantity.
Item
Material
Orient.
Diam
(mm)
Thck
(μm)
Surf.
Resistivity
Ωcm
Comment
PAM2121
p-type Si:B
[110]
2″
380
P/P
FZ 130–160
1 F @ <111> only
PAM2122
p-type Si:B
[110]
2″
280
P/E
FZ 120–300
1 F @ <111> only
PAM2123
p-type Si:B
[100]
2″
300
P/P
FZ 400–1,000
Prime, NO Flats, hard cst
PAM2124
p-type Si:B
[100]
2″
300
P/E
FZ >50
SEMI Prime, 2Flats, hard cst
PAM2125
p-type Si:B
[111]
2″
300
P/E
FZ 730–1,050
SEMI Prime, [...]
2019-02-18meta-author
SiC devices are made from silicon carbide(SiC) wafers. So, here comes a question: how to obtain a silicon carbide wafer? Generally, a SiC wafer is cut from cylindrical SiC boules. As for the cutting process, methods for cutting silicon carbide ingots are introduced here.
A diamond [...]
2021-04-27meta-author