Epitaxy

EPD for GaAs Substrate

PAM-XIAMEN can supply GaAs wafer with EPD less than 5000/cm2. Q: Could you please advise guaranteed EPD for below substrate and epi? Gallium Arsenide wafers, P/E 2″Ø×380±25µm, LEC SI c doped GaAs:-[100]±0.5°, n-type Ro=(0.8E8-0.9E8)Ohmcm, One-side-polished, back-side matte etched, 2 Flats, LT-GaAs EPI: 1-2µm, Resistivity >1E7 Ohm-cm, Carrier lifetime <1ps, Sealed under [...]

InGaAsP / InP Double Heterostructure Wafer

The InGaAsP material epitaxially grown on the InP substrate is an important material for the fabrication of optoelectronic and microwave devices. The emission wavelength of InGaAsP / InP laser structure covers 1.0-1.7μm, covering two low-loss windows of 1.3μm and 1.55μm for silica fiber communication. Therefore, InGaAsP is widely used [...]

Q:For pss wafer, the light comes out from the p-GaN side not from sapphire, so I can’t do flipchip packaging. Also I don’t know whether laser liftoff is possible for pss wafer.

Q:For pss wafer, the light comes out from the p-GaN side not from sapphire, so I can’t do flipchip packaging. Also I don’t know whether laser liftoff is possible for pss wafer. A:LED light is sourcing from mqw light, emitting in all directions, p-GaN is positive(front side), it will naturally [...]