Tatalum Metal Substrate & Foil ( Polycrystalline )

PAM XIAMEN offers Tatalum Metal Substrate & Foil ( Polycrystalline ).

General Properties for Tantalum

Symbol                   Ta
Atomic Number      73
Atomic Weight:      180.95
Density:                16.69 g/cm3
Melting Point:        2996 °C
Boiling Point:       5425+/-100 °C

Ta – Tantalum Polycrystalline Metallic Foil: 0.05mm thick x 200mm Width x 400 mm Length

Ta – Tantalum Polycrystalline Metallic Foil: 10x10x0.5mm, un- polished

Ta – Tantalum Polycrystalline Metallic Foil: 25x25x0.5mm, un- polished

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Before 1990, we are stated owned condensed matter physics research center. In 1990, center launched Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN), now it is a leading manufacturer of compound semiconductor material in China.

2019-05-20

Related Posts

EU DOPED CALCIUM FLUORIDE EU: CAF2 CRYSTAL

PAM XIAMEN offers EU DOPED CALCIUM FLUORIDE EU: CAF2 CRYSTAL. To better serve you, we would like to discuss your specific requirement, Please Contact Us for a quote. Eu doped calcium fluoride, Eu: CaF2, is an excellent scintillation crystal. It has been widely used in low energy nuclear physics [...]

2019-03-11meta-author

Electronic lifetime engineering using low-temperature GaAs in a quantum well structure

Electronic lifetime engineering using low-temperature GaAs in a quantum well structure Using an AlAs barrier, it is possible to confine the defects associated to the low temperature grown GaAs in a well-defined portion of the sample. We verified that a minimum thickness of about 5 nm [...]

2014-01-27meta-author

Low-Concentration Deep Traps in 4H-SiC Grown with High Growth Rate by Chemical Vapor Deposition

Epitaxial growth was performed on 8° off-axis 4H-SiC(0001) by horizontal hot-wall chemical vapor deposition (CVD) in a SiH4-C3H8-H2 system at 1550°C. High growth rates of 10–13 µm/h were attained by growth with a high SiH4 flow rate of 4.0 sccm. A mirror like surface [...]

2019-03-27meta-author

(111) Silicon Wafers

PAM XIAMEN offers (111) Silicon Wafers. If you don’t see what you need then please email us your specs. Diam (mm) Material Dopant Orient. Thck (μm) Surf. Resistivity Ωcm Comment 6″ n-type Si:P [111] ±0.5° 300 ±15 P/P FZ >6,000 SEMI Prime, 1Flat (57.5mm), Lifetime>1,000μs, Empak cst 7″ n-type Si:P [111] ±0.5° 300 ±15 P/P FZ >6,000 SEMI Prime, 1Flat (57.5mm), Lifetime>1,000μs, Empak cst 8″ Intrinsic Si:- [111] ±0.5° 750 E/E FZ >10,000 SEMI notch, TEST (defects, [...]

2019-02-22meta-author

Resistivity Control in Unintentionally Doped GaN Films Grown on Si (111) Substrates by MOCVD

Unintentionally doped GaN were grown on Si (111) substrates by metal organic chemical vapor deposition (MOCVD). The high-resolution X-ray diffraction (HRXRD) and Lehighton contactless sheet resistance measuring systems were employed to characterize the quality and sheet resistance (Rs) of GaN epilayer. The threading dislocation density [...]

2013-09-02meta-author Unintentionally Doped GaN

Thermal Oxide Wafers, 2 – 4″ Research Grade-4

PAM XIAMEN offers Thermal Oxide Wafers, 2 – 4″ Research Grade. Thermal oxide or silicon dioxide layer is formed on bare silicon surface at temperature range from 900°C ~ 1200°C . Compared to CVD deposited oxide layer, thermal oxide has a higher uniformity, and [...]

2019-05-20meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.