Tempered Gorilla Glass

PAM XIAMEN offers Tempered Gorilla Glass.

The glass is great for strong and inexpensive screen displays.

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Quality is our first priority. PAM-XIAMEN has been ISO9001:2008, owns and shares four modern facories which can provide quite a big range of qualified products to meet different needs of our customers, and every order has to be handled through our rigorous quality system.Test report is provided for each shipment, and each wafer are warranty.

2019-02-27

Al2O3 (Sapphire)-2

Al2O3 (Sapphire) PAM XIAMEN offers high-quality Al2O3 (Sapphire) with C-Plane (0001) orientation at different size from 5 x 5mm2 to 4”diameter: 1 square Al2O3 substrate 5x5mm,10x10mm&0.25″x0.25″ Al2O3 Sapphire Wafer, C-plane (0001), 5x5x0.5mm, 1sp – ALC=> PAM Al2O3 Sapphire Wafer, C-plane (0001), 5x5x0.5mm, 2sp – ALC=> PAM Al2O3- Sapphire Wafer, [...]

2019-04-16meta-author

Silicon-Nitride on Silicon

PAM XIAMEN offers Silicon Nitride film on Silicon Wafer. Silicon Nitride Film (LPCVD) on Silicon Wafer, 0.3um / 4″ — Si3N4-Si-4-300nm Silicon Nitride Film (PE-CVD) on Silicon Wafer, 100nm / 4″ — Si3N4-Si-4-100nm For more information, please visit our website: https://www.powerwaywafer.com, send us email [...]

2019-04-29meta-author

Pyrolytic Boron Nitride

PAM XIAMEN offers Pyrolytic Boron Nitride. Performance PBN’s properties, its intrinsic purity, superior mechanical strength, and thermal stability make it a superb choice for high temperature furnace and electrical components; microwave and semiconductor components; and industry standardized crucibles for Gallium Arsenide Crystal production. Good [...]

2019-05-14meta-author

Ceramic Substrate-16

PAM XIAMEN offers YSZ ( Yittrium stablized ZrO2). 3.5 mol.% YSZ Ceramic Substrate 10x10x0.5 mm , fine ground on both sides 3.5% YSZ Ceramic Substrate 10x10x0.5 mm, two sides polished 3.5mol.% YSZ Ceramic Substrate 10x10x0.5 mm , one side polished 8% YSZ Ceramic Substrate [...]

2019-04-18meta-author

Gallium Arsenide (GaAs) Substrate

PAM XIAMEN offers Gallium Arsenide substrate with various sizes and low density. The GaAs wafer with the conductivity of N type, P type, or semi-insulating is for sale. In addition, you can offer your own wafer design to customize. 1. Main Parameters of Gallium Arsenide Substrate MAIN [...]

2019-03-11meta-author

MoSe2 crystal

PAM XIAMEN offers MoSe2 crystal. MoSe2 is a layered material with strong in-plane bonding and weak out-of-plane interactions. These interactions lead to exfoliation into two-dimensional layers of single unit cell thickness. In addition, MoSe2 have sizable bandgaps that change from indirect to direct in [...]

2019-05-13meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

sales@powerwaywafer.com tech@powerwaywafer.com

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

Tempered Gorilla Glass

Tempered Gorilla Glass

Share this post

Related Posts

Al2O3 (Sapphire)-2

Silicon-Nitride on Silicon

Pyrolytic Boron Nitride

Ceramic Substrate-16

Gallium Arsenide (GaAs) Substrate

MoSe2 crystal

Float-Zone Mono-Crystalline Silicon

Test Wafer Monitor Wafer Dummy Wafer

Nanofabrication Photoresist

Photo Mask

CdZnTe (CZT) Wafer

Ge(Germanium) Single Crystals and Wafers

Float-Zone Mono-Crystalline Silicon

Test Wafer Monitor Wafer Dummy Wafer

Nanofabrication Photoresist

Photo Mask

CdZnTe (CZT) Wafer

Ge(Germanium) Single Crystals and Wafers