PAM XIAMEN offers PbTe single crystal substrate.(Not sell it temporarily)
Lead telluride (Phoebe) is a compound of lead and tellurium (PbTe); it is a narrow gap semiconductor. It occurs naturally as the mineral altaite.
It is often alloyed with tin to make lead tin telluride, [...]
2019-05-14meta-author
Fabrication of ZnO nanorod/p-GaN high-brightness UV LED by microwave-assisted chemical bath deposition with Zn(OH)2–PVA nanocomposites as seed layer
Chemical solution deposition is a low-temperature and possibly the lowest-cost method of growing ZnO nanorods on a GaN substrate. However, most reported methods leave an interface layer [...]
2013-08-01meta-author
PAM XIAMEN offers 4″CZ Prime Silicon Wafer-7
GG27b Silicon wafers, per SEMI Prime, P/E 4″Ø×500±25μm,
FZ Intrinsic undoped Si:-[100]±0.5°, Ro=(5,000-10,000)Ohmcm,
One-side-polished, back-side Alkaline etched, SEMI Flat (one),
Sealed in Empak or equivalent cassette,
MCC Lifetime>1,000μs.
For more information, send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com
2020-03-25meta-author
PAM XIAMEN offers 4″Prime Silicon Wafer with double side lapping
4″ CZ crystal Si wafer
N type doped P
Orientation<111>
Resistivity 12-15Ωcm
Thickness 205-220μm
Prime Flat32.5±2.5mm
no need for DSP, just double side lapping
For more information, please visit our website: https://www.powerwaywafer.com,
send us email [...]
2019-07-02meta-author
PAM XIAMEN offers Single-emitter LD Chip 880nm @8W.
Brand: PAM-XIAMEN
Wavelength: 880nm
Stripe width: 150um
Output Power: 8W
Cavity Length:2mm
For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com
Found in 1990, Xiamen Powerway Advanced Material Co., Ltd [...]
2019-05-09meta-author
Xiamen Powerway(PAM-XIAMEN), a leading developer and manufacturer of compound semiconductor epitaxial wafers, provides 808nm AlGaInP/GaAs laser wafer. AlGaInP laser epitaxial wafers are high-quality semiconductor materials that can emit light in semiconductor lasers. After made on the laser chip, these materials are energized and can emit light. Then, the electrical [...]
2016-06-13meta-author