5-6-4-1-1 SiC Schottky Power Rectifiers.
4H-SiC power Schottky diodes (with rated blocking voltages up to 1200 V and rated on-state currents up to 20 A as of this writing) are now commercially available . The basic structure of these unipolar diodes is a patterned metal [...]
2018-06-28meta-author
2-4.Wafer Surface Orientation
Denotes the orientation of the surface of a wafer with respect to a crystallographic plane within the lattice structure.
In wafers cut intentionally “off orientation”, the direction of cut is parallel to the primary at, away from the secondary at.
Measured with [...]
2018-06-28meta-author
2-28.WARP
Warp is the difference between the maximum and the minimum distances of the median surface of a free, un-clamped wafer from the reference plane defined above. This definition follows ASTM F657, and ASTM F1390,which deviation from a plane of a slice or wafer centerline [...]
2018-06-28meta-author
5-7 Future of SiC
It can be safely predicted that SiC will never displace silicon as the dominant semiconductor used for the manufacture of the vast majority of the world’s electronic chips that are primarily low-voltage digital and analog chips targeted for operation in normal [...]
2018-06-28meta-author
2-27.BOW
Bow is the deviation of the center point of the median surface of a free, un-clamped wafer from the median surface to the reference plane. Where the reference plane is defined by three corners of equilateral triangle. This definition is based on now obsolete [...]
2018-06-28meta-author
5-6-4-1 SiC High-Power Rectifiers
The high-power diode rectifier is a critical building block of power conversion circuits. Recent reviews of experimental SiC rectifier results are given in References 3, 134, 172, 180, and 181. Most important SiC diode rectifier device design trade-offs roughly parallel well-known [...]
2018-06-28meta-author