2-10.Cracks
A fracture or cleavage of the wafer that extends from the frontside surface of the wafer to the back-side surface of the wafer. Cracks must exceed 0.010” in length under high intensity illumination in order to discriminate fracture lines from allowable crystalline striations. Fracture [...]
2018-06-28meta-author
3-5. Backside Cleanliness
Veri ed by inspecting for a uniform color to the wafer backside. Note there is a darker region near the center of some higher doped wafers. Backside cleanliness speci ed as percent area clean.
2018-06-28meta-author
Total Thickness Variation (TTV): The maximum variation in the wafer thickness. Total Thickness Variation is generally determined by measuring the wafer in 5 locations of a cross pattern (not too close to the wafer edge) and calculating the maximum measured difference in thickness. The [...]
2018-06-28meta-author
3-3. Dimpling
A texture resembling the surface of a golf ball. Speci ed in % affected area.
2018-06-28meta-author
5-4-2 Growth of 3C-SiC on Large-Area (Silicon) Substrates
Despite the absence of SiC substrates, the potential benefits of SiC hostile-environment electronics nevertheless drove modest research efforts aimed at obtaining SiC in a manufacturable wafer form.Toward this end, the heteroepitaxial growth of single-crystal SiC layers on [...]
2018-06-28meta-author
5-7 Future of SiC
It can be safely predicted that SiC will never displace silicon as the dominant semiconductor used for the manufacture of the vast majority of the world’s electronic chips that are primarily low-voltage digital and analog chips targeted for operation in normal [...]
2018-06-28meta-author