SrTiO3 single crystal-4

SrTiO3 single crystal-4

PAM XIAMEN offers SrTiO3 single crystal.

SrTiO3 single crystal provides a good lattice match to most of  materials with Perovskite structure.  It is an excellent substrate for epitaxial film of HTS and many oxide. It has been used widely for special optical windows and as high quality sputtering target.  PAM XIAMEN has the full production line to manufacture first the high purity SrTiO3 powder, then the single crystal boules and finally the epi-polished substrates in many sizes. This allows us to provide SrTiO3 single crystal products with the highest quality and the lowest price to our customers the world over.

Step SrTiO3

SrTiO3 Substrate with Step Surface & Ti terminated (100) 10x10x0.5mm, 1 SP”

Substrate Specifications

Size:                          10x10x 0.5mm  +/-0.05mm
Orientation:                 0.1º miscut from  (100)  ( +/- 0.1º  from Y and X direction )
Polish:                        One  sides  EPI polished by CMP tecnology with less sub-surface lattice damage
Surface Termination:    TiO2 layer    ( via special etching)
Surface finish (RMS or Ra): <5A

AFM data of the SrTiO3 substrate is shown as the Figures below:

AFM Data of SrTiO3 Substrate with Step Surface & Ti terminated 1

AFM Data of SrTiO3 Substrate with Step Surface & Ti terminated 2-1

AFM Data of SrTiO3 Substrate with Step Surface & Ti terminated 2-2

For more information, please contact us email at victorchan@powerwaywafer.com and powerwaymaterial@gmail.com.

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

With more than 25+years experiences in compound semiconductor material field and export business, our team can assure you that we can understand your requirements and deal with your project professionally.

2019-05-14

Share this post

Related Posts

4″CZ Prime Silicon Wafer-7

PAM XIAMEN offers 4″CZ Prime Silicon Wafer-7 GG27b Silicon wafers, per SEMI Prime, P/E 4″Ø×500±25μm, FZ Intrinsic undoped Si:-[100]±0.5°, Ro=(5,000-10,000)Ohmcm, One-side-polished, back-side Alkaline etched, SEMI Flat (one), Sealed in Empak or equivalent cassette, MCC Lifetime>1,000μs. For more information, send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com

2020-03-25meta-author
100mm (4 Inch) Silicon Wafers-5

PAM XIAMEN offers 100mm Si wafers. Please send us email at sales@powerwaywafer.com if you need other specs and quantity. Item Material Orient. Diam (mm) Thck (μm) Surf. Resistivity Ωcm Comment PAM2535 n–type Si:P [100] 4″ 350 P/P 20–23 SEMI Prime, 14 wafes with 2 flats, 7 with 1 flat, Empak cst PAM2536 n–type Si:P [100] 4″ 525 P/E 10–30 SEMI, 2Flats, in Empak cassettes of 7 & 7 wafers PAM2537 n–type Si:P [100] 4″ 5800 P/E 10–100 SEMI Prime, 2Flats, [...]

2019-02-19meta-author
InAs (Indium Arsenide ) Wafer

Indium Arsenide (InAs) wafer can be provided by PAM-XIAMEN with a diameter up to 2 inch and a wide choice in off or exact orientation, high or low concentration and surface processed to optoelectronics industry. InAs wafer is an important III-V narrow band gap [...]

2016-01-15meta-author
Laser recovery of grinding-induced subsurface damage in the edge and notch of a single-crystal silicon wafer

The edges and notches of silicon wafers are usually machined by diamond grinding, and the grinding-induced subsurface damage causes wafer breakage and particle contamination problems. However, the edge and notch surfaces have large curvature and sharp corners, thus it is difficult to be finished [...]

2019-07-22meta-author
3″ Silicon Wafer-1

PAM XIAMEN offers 3″ Silicon Wafer. Material Orient. Diam. Thck (μm) Surf. Resistivity Ωcm Comment p-type Si:B [110] ±0.5° 3″ 325 P/E FZ 100-200 SEMI Prime p-type Si:B [100] 3″ 380 P/E FZ 7,000-10,000 SEMI Prime p-type Si:B [100] 3″ 350 P/P FZ 1-5 SEMI Prime p-type Si:B [100] 3″ 160 ±10 P/P FZ 0.5-10.0 SEMI Tes, Soft cst, Scratched, unsealed defects. Can be repolished for additional fee p-type Si:B [100] 3″ 890 ±13 P/P FZ 0.5-10.0 SEMIt, TTV<8μm p-type Si:B [111] ±0.5° 3″ 380 P/E FZ 8,000-10,000 SEMI TEST (has scratches), in hard cst p-type Si:B [111] ±0.5° 3″ 475 P/E FZ >4,400 SEMI Prime, TTV<5μm p-type Si:B [111] ±0.25° 3″ 400 P/E FZ >100 SEMI Prime n-type Si:P [100] 3″ 380 P/P FZ 7,000-18,000 SEMI Prime n-type [...]

2019-03-06meta-author
Fused Silica Quartz Wafers Inventory JGS1, JGS2 and JGS3 50μm – >1,000μm

You can buy fused silica quartz wafer from PAM-XIAMEN. It is usually made by smelting, cutting and grinding quartz, and the silica content of fused quartz wafer can reach more than 99.99%. The quartz hardness is seven on the Mohs scale, and it has the characteristics of high [...]

2019-02-27meta-author