YSZ crystal-1

PAM XIAMEN offers YSZ （Y2O3 stabilized ZrO2）single crystal wafer.

YSZ crystal is grown by “cold crucible” method. It is very difficult to get a larger size YSZ crystal. PAM XIAMEN supplies YSZ crystal wafer up to 2″ diameter.

YSZ Substrates (100)

1、Square YSZ (100) substrate

YSZ (100) 10x10x0.3mm, 1SP

YSZ (100) 10x10x0.3mm, 2SP

YSZ (100) 10x10x0.5, fine ground

YSZ (100) 10x10x0.5mm, 1SP

YSZ (100) 10x10x0.1mm Extra Thin Substrate, 1SP

YSZ (100) 10x10x0.1mm Extra Thin Substrate, 2SP

YSZ (100) 10x5x0.5mm, 2SP

YSZ (100) 10x5x0.5mm, 1SP

YSZ single crystal substrate,(100) with 10 degree miscut toward <110> 5x5x0.5mm, 1SP

YSZ (100) 5x5x0.5mm, 2SP”

YSZ Single Crystal Substrate (100) 5x5x0.5mm, 1SP

YSZ (100) 10x10x0.5mm, 2SP

YSZ (100) 10x10x1.0mm, 1SP

YSZ (100) 10x10x1.0mm, 2SP”

YSZ (100) 0.5″x0.5″x0.5mm, 1SP

YSZ (100) 0.5″x0.5″x0.5mm, 2SP

YSZ (100) 1″x1″x0.5mm, 1SP

YSZ (100) 1″x1″x0.5mm, 2SP

YSZ (100) 1″x1″x1.0mm, 2SP

2、Round YSZ (100) wafer

YSZ (100) Single Crystal Wafer 1″ dia x 0.5 mm, 2SP

YSZ Single Crystal Wafer (100) 1″ dia x 0.5 mm, 1SP

YSZ Single Crystal Wafer (100) 2″” dia x 0.5 mm, 1SP”

YSZ (100) 0.5″ dia x 0.5 mm, 1SP

YSZ (100) 2″ dia x 0.5 mm, 2SP

For more information, please contact us email at [email protected] and [email protected].

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China. PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices. PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

With more than 25+years experiences in compound semiconductor material field and export business, our team can assure you that we can understand your requirements and deal with your project professionally.

2019-05-21

Related Posts

La0.7Sr0.3MnO3 + 100nmPbZr0.2Ti0.8O3 on Nb:SrTiO3

PAM XIAMEN offers La0.7Sr0.3MnO3 + 100nmPbZr0.2Ti0.8O3 on Nb:SrTiO3 . 20nmLa0.7Sr0.3MnO3 + 100nmPbZr0.2Ti0.8O3 films on Nb:SrTiO3 Substrate <100> 5x5x0.5 mm, 1sp ,wt 0.7% Specifications: Film: La0.7Sr0.3MnO3 (20nm) + PbZr0.2Ti0.8O3 (100nm) Substrate:Nb: SrTiO3 (100), wt 0.7% Size: 5x5x0.5mm, one side polished For more information, please visit our website: https://www.powerwaywafer.com, send us [...]

2019-04-28meta-author

4″ Silicon Wafer-5

PAM XIAMEN offers 4″ Silicon Wafer. Material Orient. Diam. Thck (μm) Surf. Resistivity Ωcm Comment Intrinsic Si:- [100] 4″ 500 P/E FZ 13,000-20,000 SEMI Prime, TTV<5μm, Front-side Prime polish, Back-side light polish Intrinsic Si:- [100] 4″ 615 ±10 C/C FZ >10,000 SEMI Prime Intrinsic Si:- [100] 4″ 800 C/C FZ >10,000 SEMI Prime Intrinsic Si:- [111] ±0.5° 4″ 525 P/E FZ >22,000 SEMI Prime Intrinsic Si:- [111] ±0.5° 4″ 300 P/E FZ 20,000-40,000 SEMI, TTV<5μm Intrinsic Si:- [111] ±0.5° 4″ 450 P/P FZ >20,000 SEMI Prime Intrinsic Si:- [111] ±0.5° 4″ 500 P/E FZ >20,000 SEMI Prime, Extra 3 free non-prime wafers included with 4 prime wafers Intrinsic Si:- [111] ±1.0° 4″ 500 P/P FZ >15,000 SEMI Prime, TTV<5μm p-type Si:B [110] ±0.25° 4″ 525 P/E 5-10 SEMI [...]

2019-03-05meta-author

Test grade silicon wafers-5

PAM XIAMEN offers test grade silicon wafers Below is just a short list of the test grade silicon substrates! Inches Cust class Dopant Type Orientation PFL length PFL direction SFL Off orientation Resistivity Diameter Thickness Bow TTV Warp 6 DSP Phosphorus N 100 57,5 ± 2,5 110 ± 0,50 0.0 ± 0.25 ° 1.5 ± 0.5 Ohmcm 150 ± 0.5 mm 280 ± 2.5 µm 30 1,25 30 6 DSP Phosphorus N 100 57,5 ± 2,5 110 ± 0,20 0.0 ± 0.5° 1-4 Ohmcm 150 [...]

2019-02-25meta-author

How to Detect Residual Stress in SiC Wafers?

Silicon carbide (SiC) wafer material supplied by PAM-XIAMEN, like SiC substrate (link: https://www.powerwaywafer.com/sic-wafer/sic-wafer-substrate.html) is widely used in aerospace, radar communication, automotive industry and semiconductor industry due to its excellent properties such as high thermal conductivity, high strength, high temperature resistance and radiation resistance. However, [...]

2022-07-15meta-author

Undoped Silicon Wafers

PAM XIAMEN offers Undoped Silicon Wafers. Please send us email at [email protected] if you need other specs and quantity. Item Dia Dopant Ori Res (Ohm-cm) Thick (um) Polish Grade Description PAM3189 25.4mm Undoped <111> >2000 280um SSP Test Intrinsic FZ PAM3190 25.4mm Undoped <100> >5000 73.5um DSP Prime FZ, Float Zone PAM3191 50.8mm Undoped <100> >10000 280um DSP Prime FZ, Intrinsic item PAM3192 50.8mm Undoped <100> >10000 500um SSP Test Float Zone, Undoped PAM3193 76.2mm Undoped <100> >5000 Ohm-cm 350um DSP MECH NON-REFUNDABLE, POOR QUALITY. Sold “As-Is”; wafers are covered in streaks, residue, and particles. PAM3194 100mm Undoped <100> >20,000 500um SSP Prime Intrinsic, Secondary flat SEMI, TTV<10 [...]

2019-02-14meta-author

SiC(Silicon Carbide) Boule Crystal

PAM-XIAMEN offers SiC(Silicon Carbide) Boule Crystal with available size:2”,3”,4”,6” with two available length:5~10mm or 10~15mm. Fix size is workable such as 10mm, please see below specification of 4”size and 6”size: 1. Specifications of SiC Boule Crystal No.1: 4″ SiC Boule Crystal, Production Grade Polytype: Production- 4H [...]

2020-05-19meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.