5-2-1-2 Electrical Properties Owing to the differing arrangement of Si and C atoms within the SiC crystal lattice, each SiC polytype exhibits unique fundamental electrical and optical properties. Some of the more important semiconductor electrical properties of the 3C, 4H, and 6H SiC polytypes are given in [...]
2018-06-28meta-author
3-9. Comet Tails Comet tails have a discrete head and trailing tail. These features are aligned parallel to the major at. Usually, all comet tails tend to be of the same length. Count once per occurrence. Two comet tails within 200 microns count as [...]
2018-06-28meta-author
1-8.Electrical Breakdown The term electrical breakdown or electric breakdown has several similar but distinctly different meanings. For example, the term can apply to the failure of an electric circuit. Alternatively, it may refer to a rapid reduction in the resistance of an electrical insulator that [...]
2018-06-28meta-author
1-2.Stacking Sequence If we are going to make a laminated structure, we must know the thickness of each ply and the angle of each ply traditionally in degrees defined from the top layer down.
2018-06-28meta-author
2-34.Chemical Mechanical Polishing Chemical Mechanical Polishing/Planarization is short as CMP, a process of smoothing surfaces with the combination of chemical and mechanical forces. It can be thought of as a hybrid of chemical etching and free abrasive polishing.
2018-06-28meta-author
5-5-3 SiC Contacts and Interconnect All useful semiconductor electronics require conductive signal paths in and out of each device as well as conductive interconnects to carry signals between devices on the same chip and to external circuit elements that reside off-chip. While SiC itself is theoretically capable [...]
2018-06-28meta-author