3-7. ID Correct and Major Wafer Flat
Both should be readily discernible.
2018-06-28meta-author
2-20.Linear Crystallographic Defects
Crystalline solids exhibit a periodic crystal structure. The positions of atoms or molecules occur on repeating fixed distances, determined by the unit cell parameters. However, the arrangement of atom or molecules in most crystalline materials is not perfect. The regular patterns are [...]
2018-06-28meta-author
1-1.lattice parameter
The lattice constant, or lattice parameter, refers to the constant distance between unit cells in a crystal lattice. Lattices in three dimensions generally have three lattice constants, referred to as a, b, and c. However, in the special case of cubic crystal structures, [...]
2018-06-28meta-author
2-37.Test Grade
Test Grade: A silicon carbide wafer of lower quality than Prime, and used primarily for testing processes. SEMI indicates the bulk, surface, and physical properties required to label silicon carbide wafers as “Test Wafers”.
2018-06-28meta-author
5-6-4-1-2 Bipolar and Hybrid Power Rectifiers
For higher voltage applications, bipolar minority carrier charge injection (i.e., conductivity modulation) should enable SiC pn diodes to carry higher current densities than unipolar Schottky diodes whose drift regions conduct solely using dopant-atom majority carriers . Consistent with silicon [...]
2018-06-28meta-author
5-5-6 SiC Device Packaging and System Considerations
Hostile-environment SiC semiconductor devices and ICs are of little advantage if they cannot be reliably packaged and connected to form a complete system capable of hostile-environment operation. With proper material selection, modifications of existing IC packaging technologies appear [...]
2018-06-28meta-author