1 – Materials and manufacturing techniques for silicon-on-insulator (SOI) wafer technology
This chapter reviews various processes for manufacturing SOI wafers. There is a specific focus on Separation by IMplantation of OXygen (SIMOX) and on technologies based on direct bonding (bonded silicon-on-insulator (BSOI), epitaxial layer transfer process (Eltran®), [...]
MOS SiO2/GaN structures were fabricated with different surface preparation and different PECVD processes for the dielectric thin film deposition (ECR-PECVD and ICP-PECVD in continuous and pulsed modes). On the basis of C-V curves, the surface preparation steps, involving chemical etching with BOE, UV-Ozone oxidation [...]
N-Type Silicon Substrates
PAM XIAMEN offers n-type silicon wafers in stock.
N-type Silicon
50.8mm N-type Arsenic Doped (100) 0.001-0.005 ohm-cm 280um SSP In stock
76.2mm N-type Phosphorous Doped (100) 1-10 ohm-cm 380um SSP In stock
100mm N-type Phosphorus Doped (100) 10-20 ohm-cm 280um DSP In stock
150mm N-type Antimony Doped [...]
2019-02-14meta-author
PAM XIAMEN offers 4″ Silicon Wafer.
Diameter
Type
Dopant
Growth
method
Orientation
Resistivity
Thickness
Surface
Grade
100
N
Phos
CZ
-100
1-20
43768
P/P
PRIME
100
N
Phos
CZ
-100
1-20
40-60
P/P
PRIME
100
N
Phos
CZ
-100
1-20
80-100
P/P
PRIME
100
N
Phos
CZ
-100
1-20
180-200
P/P
PRIME
100
N
Phos
CZ
-100
300-350
P/P
PRIME
100
N
Phos
CZ
-100
1-20
300-350
P/E
PRIME
100
N
Phos
CZ
-100
350-400
P/P
PRIME
100
N
Phos
CZ
-100
1-3
350-400
P/P
PRIME
100
N
As
CZ
-100
.001-.005
375-425
P/P
PRIME
100
N
Phos
CZ
-100
1-20
375-425
P/E
PRIME
100
N
Phos
CZ
-100
450-500
P/P
PRIME
100
N
As
CZ
-100
.001-.005
450-500
P/P
PRIME
100
N
Sb
CZ
-100
.005-.02
450-500
P/P
PRIME
100
N
Phos
FZ
-100
>3000
450-500
P/P
PRIME
100
N
As
CZ
-100
.001-.005
500-550
P/E
PRIME
100
N
Sb
CZ
-100
.005-.02
500-550
P/E
PRIME
100
N
Phos
FZ
-100
>3000
500-550
P/E
PRIME
100
N
Phos
CZ
-100
1-20
500-550
P/E
PRIME
100
N
Phos
CZ
-100
1-20
500-550
P/E/DTOx
PRIME
100
N
Phos
CZ
-100
1-20
500-550
P/E/Ni
PRIME
100
N
Phos
CZ
-100
1-20
500-550
P/E/OX
PRIME
For more information, please visit our website: https://www.powerwaywafer.com,
send us email at sales@powerwaywafer.com and powerwaymaterial@gmail.com
Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China.PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, [...]
2019-03-04meta-author
PAM-XIAMEN offers GaN on silicon HEMT wafer for Power, E-mode. Because the normally-on characteristic will Increase the complexity of circuit design and power consumption, designing an enhanced (E-Mode) HEMT that is turned off under zero grid bias will be crucial for advancing the application of GaN-on-Silicon HEMT in [...]
2019-05-17meta-author
PAM XIAMEN offers 8″CZ Prime Silicon Wafer With Notch
It will be carried out after the silicon ingot is made. A flat angle is cut on the silicon ingot below 200 mm, which is called flat. In order to reduce waste, only a small round hole [...]
2020-06-15meta-author