2-31.N type
A semiconductor has electrical conductivity between that of a conductor and an insulator. Semiconductors differ from metals in their characteristic property of decreasing electrical resistivity with increasing temperature.Semiconductors can also display properties of passing current more easily in one direction than the other, [...]
2018-06-28meta-author
2-12.Edge Exclusion
The outer annulus of the wafer is designated as wafer handling area and is excluded from surface nish criteria (such as scratches, pits, haze, contamination, craters,dimples, grooves, mounds, orange peel and saw marks). This annulus is 2 mm for 76.2 mm substrates, and [...]
2018-06-28meta-author
2-29.Resistivity
The resistance to current flow and movement of electron and hole carries in the silicon carbide. Resistivity is related to the ratio of voltage across the silicon to the current flowing through the silicon carbide per unit volume of silicon carbide. The units for [...]
2018-06-28meta-author
3-6. Edge Chips
Areas where material has been unintentionally removed from the wafer.Do not confuse fractures in epi crown with edge chips.
2018-06-28meta-author
5-5 SiC Device Fundamentals
To minimize the development and production costs of SiC electronics, it is important that SiC device fabrication takes advantage of existing silicon and GaAs wafer processing infrastructure as much as possible. As will be discussed in this section, most of the [...]
2018-06-28meta-author
2-2.Wafer Thickness, Center Point
Thin (thickness depends on wafer diameter, but is typically less than 1mm),circular slice of single-crystal semiconductor material cut from the ingot of single crystal semiconductor; used in manufacturing of semiconductor devices and integrated circuits; wafer diameters may range from 5mm to [...]
2018-06-28meta-author