Float Zone Silicon Wafers

PAM XIAMEN offers Float Zone Silicon Wafers, they use FZ Silicon substrates instead of Czochralski grown silicon.

Or simply put, Float Zone Si is most ly used low volume applications that require high-efficiency while CZ Silicon is used for high volume, less expensive applications.

FZ Si Dia	Type/Dopant	Orientation	Resistivity Ohm-cm	Polish	Thickess (Microns)	Comments
25.4mm	Undoped	-100	>2,000	SSP	280	Intrinsic Float Zone
25.5mm	N/Ph	-111	>200	SSP	200	2 FLats back-side Alkaline etched
25.6mm	Undoped	-100	>5,000	SSP	500	Undoped Float Zone
25.7mm	P/B	-111	40-60	SSP	255	Buy as few as one
25.8mm	Undoped	-100	>10,000	DSP	650um	Hard to Find
25.9mm	Undoped	-100	>1,000	SSP	725um	FZ SI TTV <6um, Bow

For more information, please visit our website: https://www.powerwaywafer.com,
send us email at [email protected] and [email protected]

Found in 1990, Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN) is a leading manufacturer of semiconductor material in China.PAM-XIAMEN develops advanced crystal growth and epitaxy technologies, manufacturing processes, engineered substrates and semiconductor devices.PAM-XIAMEN’s technologies enable higher performance and lower cost manufacturing of semiconductor wafer.

Before 1990, we are stated owned condensed matter physics research center. In 1990, center launched Xiamen Powerway Advanced Material Co., Ltd (PAM-XIAMEN), now it is a leading manufacturer of compound semiconductor material in China.

2019-02-14

Related Posts

SiO2+Si3N4 on Silicon wafer

PAM XIAMEN offers SiO2 +Si3N4 on Silicon wafer as follows No.1: 300 nm SiO2+50nm Si3N4 Films on Si (100), 2″ dia x 0.250 mm t, P type , B-doped,Resistivity:0.01-0.1ohm.cm Thermal oxide Layer Research Grade , about 80 % useful area SiO2(300nm)+50nm Si3N4 layer on 2″ Silicon wafer( Both [...]

2019-04-29meta-author

Ge epi-film on Si

PAM XIAMEN offers Ge epi-film on Si. 4” N-type Ge epi-film on N-type Silicon Wafer, 0.5 um thickness 4” P-type Ge film on N-type Silicon Wafer, 0.5 um thickness For more information, please visit our website: https://www.powerwaywafer.com, send us email at [email protected] and [email protected] [...]

2019-04-28meta-author

How Silicon Carbide Wafers Are Made?

Silicon carbide (SiC) is a compound semiconductor material composed of carbon and silicon elements, and is called wide-bandgap semiconductor material because the band gap is greater than 2.2eV. PAM-XIAMEN can provide N-type and semi-insulating SiC wafers. More specifications of SiC wafer please visit https://www.powerwaywafer.com/sic-wafer. How SiC wafers [...]

2022-08-17meta-author

(20-21) Plane U-GaN Freestanding GaN Substrate

PAM-XIAMEN offers (20-21) Plane U-GaN Freestanding GaN Substrate Item PAM-FS-GAN(20-21)-U Dimension 5 x 10 mm2 or 5 x 20 mm2 Thickness 380+/-50um Orientation (20-21)/(20-2-1) plane off angle toward A-axis 0 ±0.5° (20-21)/(20-2-1) plane off angle toward C-axis -1 ±0.2° Conduction Type N-type / Undoped Resistivity (300K) < 0.1 Ω·cm TTV ≤ 10 µm BOW BOW ≤ 10 µm Surface Roughness: Front side: Ra<0.2nm, epi-ready; Back side: Fine Ground or polished. Dislocation Density ≤5 x 106 cm-2 Macro Defect Density 0 cm-2 Useable Area > 90% (edge exclusion) Package each in single wafer container, under nitrogen atmosphere, packed in class 100 clean room For more information, please contact us email at [email protected] and [email protected]

2020-08-20meta-author

InSb Epi Wafer

Xiamen Powerway offers InSb (indium antimonide) epi wafer with homogeneous structure, which can be used to detect infrared radiation with a wavelength of 8~12um. Homoepitaxial InSb epi wafer on InSb substrate can improve the operating temperature of indium antimonide detector. InSb epi ready wafer 1. InSb Homogeneous Structures 1.1 [...]

2020-03-25meta-author

Stress in (Al, Ga)N heterostructures grown on 6H-SiC and Si substrates byplasma-assisted molecular beam epitaxy

The paper describes experimental results on low temperature plasma-assisted molecular beam epitaxy of GaN/AlN heterostructures on both 6H-SiC and Si(111) substrates. We demonstrate that application of migration enhanced epitaxy and metal-modulated epitaxy for growth of AlN nucleation and buffer layers lowers the screw and [...]

2019-11-05meta-author

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.

[email protected] [email protected]

Read More

Float-Zone Mono-Crystalline Silicon

PAM-XIAMEN can offer float zone silicon wafer, which is obtained by Float Zone method. Monocrystalline silicon rods is got through float zone growth, and then process the monocrystalline silicon rods into silicon wafers, called float zone silicon wafers. Since the zone-melted silicon wafer is not in contact with the quartz crucible during the floating zone silicon process, the silicon material is in a suspended state. Thereby, it is less polluted during the process of floating zone melting of silicon. The carbon content and oxygen content are lower, the impurities are less, and the resistivity is higher. It is suitable for the manufacture of power devices and certain high-voltage electronic devices.
Read More

Test Wafer Monitor Wafer Dummy Wafer

As a dummy wafer manufacturer, PAM-XIAMEN offers silicone dummy wafer / test wafer / monitor wafer, which is used in a production device to improve safety in the beginning of production process and are used for delivery check and evaluation of process form. As dummy silicon wafers are often used for experiment and test, size and thickness thereof are important factors in most occasions. 100mm, 150mm, 200mm, or 300mm dummy wafer is available.
Read More

Nanofabrication Photoresist

PAM-XIAMEN Offers photoresist plate with photoresist
Read More

Photo Mask

PAM-XIAMEN Offers Photomasks

A photo mask is a thin coating of masking material supported by a thicker substrate, and the masking material absorbs light to varying degrees and can be patterned with a custom design. The pattern is used to modulate light and transfer the pattern through the process of photolithography which is the fundamental process used to build almost all of today’s digital devices.
Read More

CdZnTe (CZT) Wafer

Cadmium Zinc Telluride (CdZnTe or CZT) is a new semiconductor, which enables to convert radiation to electron effectively, it is mainly used in infrared thin-film epitaxy substrate, X-ray detectors and Gamma-ray CdZnTe detectors.
Read More

Ge(Germanium) Single Crystals and Wafers

PAM-XIAMEN offers 2”, 3”, 4” and 6” germanium wafer, which is short for Ge wafer grown by VGF / LEC. Lightly doped P and N type Germanium wafer can be also used for Hall effect experiment. At room temperature, crystalline germanium is brittle and has little plasticity. Germanium has semiconductor properties. High-purity germanium is doped with trivalent elements (such as indium, gallium, boron) to obtain P-type germanium semiconductors; and pentavalent elements (such as antimony, arsenic, and phosphorus) are doped to obtain N-type germanium semiconductors. Germanium has good semiconductor properties, such as high electron mobility and high hole mobility.