Transmittance of Glass Wafer
Different Glass wafer material has different transmittance. The end user should check their detail application, and then choose corresponding glass wafer material, see below:
Transmission Rate of Jgs1 Glass Wafer
Transmission Rate of Jgs1 Glass Wafer
Transmittance of Glass Wafer
Transmission Rate of Jgs2 Glass [...]
2020-06-18meta-author
PAM XIAMEN offers 2″ Diameter Wafer-2″ wafers (100).
2″ Diameter Wafer
2″ wafers (100)
2“ Undoped Ge (100)
Ge Wafer (100) Undoped, 2″ dia x 0.5 mm, 1SP, resistivities: >50 ohm-cm
Ge Wafer (100) Undoped, 2″ dia x 0.5 mm, resistivities: >50 ohm-cm, 2SP [...]
2019-04-23meta-author
PAM XIAMEN offers SrTiO3 single crystal.
SrTiO3 (STO) single crystal provides a good lattice match to most of materials with Perovskite structure. It is an excellent substrate for epitaxial film of HTS and many oxide. It has been used widely for special optical windows and as high quality [...]
2019-05-14meta-author
PAM XIAMEN offers LiF Lithium Fluoride Crystal.
LiF crystal has excellent VUV region transmittance. It is used for windows, prisms, and lenses in the visible and infrared in 0.104 μm – 7 μm. LiF crystal is sensitive to thermal shock and would be attacked by [...]
2019-03-14meta-author
N-type or P-type 125mm silicon wafer can be supplied with the orientation of <111> or <100>. More specs are shown as following:
1. 125mm Silicon Substrate Wafer List
No. 1
ID
Dia
Type
Dopant
Ori
Res
(Ohm-cm)
Thick (um)
Polish
Grade
Description
PAM2683
125mm
N
As
<111>
<0.0035
375um
SSP
MECH
Mechanical Grade. EPI Layer: N/Phos Res: 4.59-5.874ohm.cm 12-16um
PAM2684
125mm
N
P
<100>
<0.001
3000um
SSP
Test
3mm thick
PAM2685
125mm
P
B
<111>
43485
525-575um
SSP
Test
Sold As-Is
PAM2686
125mm
P
B
<111>
43485
500-550um
SSP
Test
Sold As-Is
No. 2
Item
Material
Orient.
Diam
(mm)
Thck
(μm)
Surf.
Resistivity
(Ωcm)
Comment
PAM2687
p-type Si:B
[100]
5″
889 [...]
2019-02-20meta-author
PAM XIAMEN offers single crystal LiTaO3.
LiTaO3 X-cut
LiTaO3 optical grade, X-cut, 10x10x0.5mm, 2 SP
LiTaO3 saw grade, X-cut, 10x10x0.5mm, 1sp
LiTaO3 saw grade, X-cut, 3″ Dia x 0.5mm wafer, 1sp
LiTaO3, 4″ wafer, specific parameters as follows:
4″ LT Wafer Specification
Diameter
100.0±0.5mm
Orientation Flat (OF)
30±2mm
Second Refer. Flat [...]
2019-05-08meta-author